Translated from the original language - English - 29Manual 6-1624970M - rev. 1 - 11/01/2023
CONFIGURATION PROCEDURE
1.
Make sure you are out of the programming menus.
To exit, briefly press the MENU key until you see the status of the
control panel.
SS
2.
Access the advanced menu by holding down the MENU key for at
least 5 seconds.
SS
3.
Press the DOWN button several times until the DEF parameter ap-
pears.
SS
4.
Hold down the MENU key for at least 3 seconds
The set value flashes.
SS
5.
Use the UP and DOWN keys to select the desired value.
(for example "1").
SS
6.
Press and hold the MENU key for 3 seconds to confirm.
The value stops flashing.
SS
7.
Release the MENU key and then press and hold the MENU key.
A countdown is displayed.
DO NOT RELEASE THE MENU KEY DURING THIS STEP.
SS
8.
At the end of the countdown, the word "don" appears to confirm the
correct execution of the procedure.
To exit, briefly press the MENU key until you see the status of the
control panel.
To Next Page
Loading...
