32 - English - Translated from the original language Manual 6-1624970M - rev. 1 - 11/01/2023
5.6 - LEARNING OF THE STROKES
At the first installation it is necessary to perform a learning procedure to detect the total length of the stroke, the length of the
slowdowns and all other areas of the installation necessary for the correct operation of the automation.
LENGTH OF THE STROKE
POSITION OF
"GATE OPEN"
POSITION OF
"GATE CLOSED"
Handling area at slowdown speed.
Handling area at normal speed.
ADJUSTMENT OF LIMIT SWITCH POSITIONS
Perform some movements of the mobile door to adjust the position of the electro-mechanical limit switches and verify the correct
connection in the control unit.
LED DESCRIPTION POSITION
LSO LIMIT SWITCH ACTIVE
LED LSO - OFF
LED LSC - ON
Gate in position of "OPEN GATE"
LIMIT SWITCHES NOT ACTIVE
LED LSO - ON
LED LSC - ON
Gate in intermediate position
LSC LIMIT SWITCH ACTIVE
LED LSO - ON
LED LSC - OFF
Gate in position of "CLOSED GATE"
To Next Page
Loading...
