11.7 USB Storage
By using FTP Client software or SAMBA, users are able to access the files stored in the USB Storage device
(FAT32/NTFS) after being inserted to the USB port on the router.
The USB LED notification will light up after the storage device has been inserted into the USB port. The status of the
USB Storage settings can be seen after logging in to the router.
Status：
Link Down：The USB port does not detect the device or there are no devices plugged into the port.
Disconnect：An USB Storage device is plugged into the port, clicking on “Disconnect” will disconnect the device.
11-7-1 FTP Service
The FTP Service functionality is enabled by default, ony the seup of an user account is required to use the service.
Please use an FTP Client software to use the service.
The FTP Server IP is the same as the Router IP.
The default service port is 21.
(1) User Account setup
To Next Page
Loading...
Need help?
General
