Allora 2
5
1 - Introduction
The Allora is a very easy to use text input based communication aid. Any
message written on Allora’s keyboard will be pronounced with a high quality
natural sounding voice. Intelligent word or sentence prediction, prestored
messages and abbreviation expansion will increase the communication speed
significantly.
A detachable, high contrast second display allows the communication partner(s)
to visually follow the message that is written.
The Allora has an internal microphone to allow voice recording. These
recordings can be linked to individual keys on the keyboard.
The Allora can be equipped with an optional GSM module to allow the sending
and receiving of SMS text messages.
The Allora has a communication support function and is intended for people with
communicative disabilities for general use in their daily life provided they have
adequate motor and mental capacities to use the device. The device is not be
used for clinical, therapeutic or diagnostic purposes.
The Allora can optionally be equipped with an infrared (IR) environmental control
unit (ECU) module that can learn and transmit IR codes in order to get other
devices to operate. This is designed for general purpose usage such as
appliances for audio-visual and home automation applications. This ECU
extension should not be used for clinical, therapeutic or diagnostic applications.
The Allora is portable but can also be fixed on a wheelchair. To facilitate the
portability you can use a carrying case.
The Allora is easy to operate but with extended features to support the
communication. To gain optimum use of the Allora it is advised to read this
guide before using the unit.
1.1 Cleaning instructions
It is advisable to clean the Allora regularly to minimize the spread of germs. The
keyboard in particular needs the most attention, as this is a gathering place for
germs.
It is recommended that cleaning agents specifically designed for ICT equipment
are used to clean the device eg. Cyber Clean or an antiseptic disinfectant like
Neo-Sabenyl (read instructions for use). Always use a damp cloth.
Use a dry, soft cloth to remove dust. For localised spots on the enclosure you
can use a damp cloth. Avoid moisture penetrating into the speaker openings, the
microphone opening and the connectors. Dirt at the height of the connectors can
be removed with a cotton swab.
Use a dry cloth to clean the screen. Do not use paper towels as these can cause
small scratches on the screen. For removing grease or spots on the screen you
can use cleaning agents specifically designed for cleaning screens (spray or
wipes) or an antiseptic disinfectant. Do not press hard on the screen during
cleaning.
To Next Page
Loading...