Need help?Do you have a question about the Allot SG-9100 Series and is the answer not in the manual?
Guidance on preparing the environment and resources for SG-9100 installation.
Lists the components included with the SG-9100 V1 and V2 systems.
Details the types of cables and transceivers required for connecting the SG-9100.
Describes the buttons and LEDs on the front panel of the SG-9100 V2.
Details the network and other ports located on the rear of the SG-9100 V2.
Explains the power supply modules and their status LEDs for the SG-9100.
Describes the buttons and LEDs on the front panel of the SG-9100 V1.
Details the network and other ports located on the rear of the SG-9100 V1.
Overview of the external bypass unit and its role in ensuring network connectivity.
Details the HD 8 Bypass Unit, its interfaces, and operation.
Details the HD 16 Bypass Unit, its interfaces, and operation.
Describes the USB cable used to connect the bypass unit to the SG-9100.
Guidelines for electrical power sources and installation compliance.
Specifies requirements for power cables and connectors used with the SG-9100.
Instructions and recommendations for safely unpacking the SG-9100 unit.
Guidelines for physical installation, including space and airflow requirements.
Detailed steps and safety precautions for mounting the SG-9100 in a rack.
Procedures for connecting the SG-9100 to the network via bypass units.
Describes port configurations for the SG-9100 V2 in various deployment scenarios.
Describes port configurations for the SG-9100 V1 in various deployment scenarios.
Explains how to configure active redundancy for high availability.
Steps for powering on the SG-9100 and initial boot process.
Methods for accessing and identifying the SG-9100 revisions and interfaces.
Details on configuring IP settings and management traffic for the SG-9100.
Detailed technical specifications for SG-9100 V1 and V2 models.
Information on operating temperature, humidity, and altitude.
Lists normative standards and safety certifications applicable to the SG-9100.
Physical specifications and USB types for different bypass units.
Guidelines and warnings related to laser safety for SFP+ modules.
To Next Page
General
