Do you have a question about the ALLTO SOLAR AS-10A-MPPT-D and is the answer not in the manual?
Push to cycle through different battery type modes.
Shows battery voltage and its state-of-charge (SOC).
Displays solar charge current and battery type status.
Identifies SAE plugs for input and output connections.
Details on 12V, 12V AGM, and 12V Lithium charge modes.
Explanation of LED behavior for different charge levels.
Troubleshooting for blank or frequently turning on/off LED screens.
Diagnosing issues with no charge current and battery percentage display.
| Category | Inverter |
|---|---|
| Rated Charge Current | 10A |
| Battery Voltage | 12V/24V Auto |
| Model | ALLTO SOLAR AS-10A-MPPT-D |
| Type | Solar Charge Controller |
| Maximum Input Voltage | 100V |
| Max PV Input Power | 130W(12V) / 260W(24V) |
| Protection | Overcharge, Over-discharge, Overload, Short circuit, Reverse polarity |
| Operating Temperature | -20℃ ~ +55℃ |
| Humidity | 10%~90% RH, No Condensation |
| Display | LCD |
Loading...