This method ensures good, non-intrusive, rather temporary fixation of the Aloxy Pulse to a flat
metallic surface suitable for instance for movement detection and vibration monitoring. Typical
applications are temporary vibration monitoring of a rotating equipment, temporary asset tracking,
temperature monitoring around a motor, etc.
It is best to use the following magnets:
ALOXY Articel ID: ITN-25 M5 magnet
Strength ca. 14 kg (ca. 137 N)
E. Installation on a surface using double sided foam sticker:
This method ensures fair, non-intrusive fixation of the Aloxy Pulse to a flat asset surface suitable for
instance for movement detection and temperature monitoring. Typical applications are asset tracking,
temperature monitoring around a motor, etc.
F. Installation using an external metal bracket on the spindle of a multi-turn valve:
This method ensures excellent non-intrusive attachment of the Aloxy Pulse to the handwheel of a
multi-turn valve. A typical application is manual valve position monitoring of small multi-turn valves.
To Next Page
Loading...