T101 Portable Power Supply Quick Start Guide
How To Use The Power Supply
Using with DC 12V Devices
Note: The power supply will automatically turn off after 30 seconds if it
does not detect a connected device.
Using with AC Devices
Connect the AC appliance to one of the T101 power supply's AC outlet.
a
b
d
c
Using with USB Devices
Using the LED Flashlight
1. Turn on
Double press " " button to switch on the LED lamp.
2. Change light modes
Double press " " button to switch between modes Flashlight / Blink / SOS.
2. To turn off
Long press " " button 3 seconds to switch off the LED lamp.
Connect the USB cable to one of the T101 power supply's USB
sockets. Connect the other end to your USB device.
LED Lamp
USB C
Connect the DC appliance to the power supply's 5.5mm 12V DC port,
press the " " button to switch on DC output. Long press the " " button
for 3 seconds to switch off.
Long press button for 3 seconds to switch on the power button and the
unit will start providing power to your appliances. Long press the button for
3 seconds to switch off.
"AC"
Press the button to turn on USB output. Long press the button for
3 seconds to switch off.
" "
Note: The power supply will automatically turn off after 30 seconds if it
does not detect a connected device.
To Next Page
Need help?
General
