14
AlphaDynamic Pumps SA to find an alternative solution. If the pump is temporarily removed from the
system and kept in stock, it's necessary to follow the instructions of paragraph 2.3 "Storage".
3.9 Noise Level
In some circumstances, for example when the pump works with high pressure and low capacity, the increase
of the noise can be disturbing for the personnel working in the proximity. In this case it's possible to intervene
with:
earplugs
protective authorized caps against noises for the personnel in the proximity
soundproofing canopy for the pump. In this case, make sure that the motor ventilation is guaranteed
4. Maintenance
4.1 General Dispositions
During the warranty period disassembly activities of the pump are allowed only for AlphaDynamic
Pumps SA personnel or personnel authorized by AlphaDynamic Pumps SA. All the operations
described in the paragraphs below have to be done exclusively by qualified staff and all the warnings
written in this manual must be followed step by step.
Clean the external surface of the pump using only antistatic equipment. Every operation executed
on the apparatus has to be done after the disconnection of electric supply.
Use exclusively lifting machinery to move pumps with weight higher than 16 kg. During the moving
of the machine or parts of the machine avoid collisions or falls which can damage the apparatus.
Before disassembling the parts of the pump, make sure that the dangerous internal liquids have been
removed /washed. THE PUMP HAS TO BE DRAINED AND DECONTAMINATED.
Pay close attention that some internal liquids can have a dangerous reaction when contacting water.
During the operations of unloading dangerous liquids make sure to eliminate any danger for the
surrounding personnel and the environment.
To Next Page
Loading...