BOOTH: RCA Unbalanced Impedance 600 Ohm
/ XLR Balanced Impedance 50 Ohm
TAPE: RCA Unbalanced Impedance 600 Ohm
EFFECT LOOP 1: RCA Unbalanced Impedance 600 Ohm
EFFECT RETURN: RCA Unbalanced Impedance 600 Ohm
Frequency response: +-1db 20hz-20Khz
Power requirements:
(3 types) USA-115VAC, EU-230VAC, Japan-100VAC 50/60hz
Dimensions (W)280 x (H)240 x (D)90 mm
Power Consumption: 20W
Front panel color: Black
Due to the Model-9000 is designed for a professional use, there is no power switch to avoid
accidentally power off while playing.
To turn on the mixer, simply connect the power cord to the external power box then connect the plug
to a standard wall outlet. To turn off, just disconnect the power plug.
The external power box will have a heat when the power is on. For safety, unplug the power
chord when it is not used for a long period of time.
Turning on the power
Caution / Warning
To Next Page
Loading...