Alphasense OPC-R1 - Page 28

072-0500 Alphasense User Manual
OPC-R1 Optical Particle Counter Issue 1
Alphasense Ltd Page 28 of 33 February 2019
Sensor Technology House, 300 Avenue West, Skyline 120, Great Notley. Essex.CM77 7AA. UK
Tel: +44 (0) 1376 556700 - Fax: +44 (0) 1376 335899
Email: sensors@alphasense.com - Web: www.alphasense.com
Read information
string
0x3F
0x3F 0x31 Suggest that 10 ms be used as
delay between command byte and
following byte.
0x3F 0xF3
0x3F InfoStr ascii char00: "O" (=0x4F)
SerialStr is a string of 60 characters.
Note an example is given exact
outpurt is dependant on FW
0x3F InfoStr ascii char01: "P" (=0x50) Value of shaded bytes doesn't
matter.
0x3F InfoStr ascii char02: "C" (=0x43)
0x3F InfoStr ascii char03: "-" (=0x2D)
0x3F InfoStr ascii char04: "R" (=0x52)
0x3F InfoStr ascii char05: "1" (=0x31)
0x3F InfoStr ascii char06: " " (=0x20)
0x3F InfoStr ascii char07: "F" (=0x46)
0x3F InfoStr ascii char08: "i" (=0x69)
0x3F InfoStr ascii char09: "r" (=0x72)
0x3F InfoStr ascii char10: "m" (=0x6D)
0x3F InfoStr ascii char11: "w" (=0x77)
0x3F InfoStr ascii char12: "a" (=0x61)
0x3F InfoStr ascii char13: "r" (=0x72)
0x3F InfoStr ascii char14: "e" (=0x65)
0x3F InfoStr ascii char15: "V" (=0x56)
0x3F InfoStr ascii char16: "e" (=0x65)
0x3F InfoStr ascii char17: "r" (=0x72)
0x3F InfoStr ascii char18: "=" (=0x3D)
0x3F InfoStr ascii char19: "0" (=0x30)
0x3F InfoStr ascii char20: "2" (=0x32)
0x3F InfoStr ascii char21: "." (=0x2E)
0x3F InfoStr ascii char22: "1" (=0x32)
0x3F InfoStr ascii char23: "0" (=0x2E)
0x3F InfoStr ascii char24: "." (=0x2E)
0x3F ………. See 072-0501 for full details
0x3F InfoStr ascii char59: "S" (=0x53)
Read serial
number string
0x10
0x10 0x31 Suggest that 10 ms be used as
delay between command byte and
following byte.
0x10 0xF3
0x10 SerialStr ascii char00 SerialStr is a string of 60 characters.
0x10 SerialStr ascii char01 Value of shaded bytes doesn't
matter.
0x10 ……………………….. See 072-0501 for full details
0x10 SerialStr ascii char59