EasyManua.ls Logo

Alphasense OPC-R1 - Page 3

Default Icon
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
072-0500 Alphasense User Manual
OPC-R1 Optical Particle Counter Issue 1
Alphasense Ltd Page 3 of 33 February 2019
Sensor Technology House, 300 Avenue West, Skyline 120, Great Notley. Essex.CM77 7AA. UK
Tel: +44 (0) 1376 556700 - Fax: +44 (0) 1376 335899
Email: sensors@alphasense.com - Web: www.alphasense.com
2 OPC-R1 Specification
All dimensions in millimetres (± 0.15 mm)
MEASUREMENT
Particle range
(
m
m) Spherical equivalent size (based on
RI of 1.5+i0)
0.35 to 12.4
Size categorisation (standard) Number of software bins 16
Sampling interval (seconds) Histogram period (recommended) 1 to 30
Sample flow rate mL/ min 240
Max particle count rate Particles/ second 10,000
Detection limits (PM
10
) Minimum
Maximum (electronic limit)
0.01 mg/m
3
1 500 mg/m
3
Coincidence probability % at 10
6
particles/ L 0.7
POWER
Measurement mode mA 95-100
Non-measurement mode mA Laser and fan off 5
Transient power on start-up mW for 1 ms <5000
Voltage range V DC 4.8 to 5.2
KEY SPECIFICATIONS
Digital Interface
SPI (Mode 1)
Laser classification as enclosed housing Class 1
Temperature range °C -10 to 50
Humidity range % rh (continuous) 0 to 95 (non-condensing)
Weight g < 30
Table 1. Power and environmental performance limits