FUNCTIONS CONTINUED
INPUT SOURCE
Press the M (10) button to switch sources (Bluetooth, Micro SD
Mode, AUX IN and FM).
HANDS FREE
While in Bluetooth mode, when receiving a phone call, you can
momentarily press the button on the speaker to answer the
incoming call and press again to end the call. Pressing and holding
down the button will reject the phone call.
IMPORTANT: Not all phones support playback control and phone answer/
end control. Check your phone’s user manual for more information if you’re
having trouble with this feature.
DISPLAY BRIGHTNESS:
Press and hold the M (10) button multiple times to change the
display brightness (low, med, high and off).
FUNCTIONS CONTINUED
CLOCK / ALARM FUNCTION continued:
SETTING THE ALARM
Momentarily press the TIME (11) button, the hour indicator will
start to blink. Now you will be able to set the hours by pressing
the + to increase and - to decrease the hours. Press the button
to conrm the hours and program the minutes. Using the same
buttons you used for the hours and press the button to conrm
your entry. Press the TIME (11) button to save.
Press the button to select which alert will be used.
Press + and - to toggle which alert you want to use for the alarm.
S-1: ALARM 1
S-2: ALARM 2
S-3: ALARM 3
S-P3: MIRO SD CARD
S-FM: FM MODE
Press the TIME (11) button to save and exit the alarm settings
Press the TIME button to stop alarm.
RADIO MODE
Press the M (10) to switch to radio mode.
Press and hold the button to start the auto search. Up to 60
stations will be stored. Press and hold the + or - buttons to select
one of the stored stations.
AUX IN MODE
Use the 3.5mm audio cable to connect the speaker to a external
device. The speaker will automatically switch to AUX IN mode. To
exit AUX IN mode, press the M (10) button and enter bluetooth mode.
MICRO SD CARD MODE
Insert a Micro SD card (up to 32GB) into the input on the rear of the
speaker, in order to play MP3 music.
To Next Page
Loading...
