Need help?Do you have a question about the Alpic Air AWI/O-25HPDC1A and is the answer not in the manual?
General| Brand | Alpic Air |
|---|---|
| Model | AWI/O-25HPDC1A |
| Category | Air Conditioner |
| Language | English |
Guidelines on safe handling of power cords, sockets, circuits, and voltage.
Precautions for unit operation, cleaning, and extended periods of non-use.
Explains working principles, anti-freezing, defrosting, and temperature ranges.
Details the recommended indoor and outdoor temperature ranges for cooling and heating.
Identifies the key parts of the indoor unit, including the front panel and louvers.
Identifies the key parts of the outdoor unit, including pipes and wiring.
Explains the meaning of various icons displayed on the remote controller.
Details the primary functions of the remote controller buttons like ON/OFF, MODE, FAN, and TEMP.
Explains how to use timer functions, SLEEP, TURBO, and X-FAN modes.
Explains various icons shown on the remote controller's LCD, like MODE, SLEEP, LIGHT, TEMP, LOCK, and AIR.
Details controls for setting time, swing direction, and the SET TIME display.
Covers combination button functions like lock/unlock, Fahrenheit/centigrade switch, and energy-saving mode.
Instructions and notes for replacing batteries in the remote controller.
How to operate the unit using the manual switch when the remote is lost or damaged.
Details the AUTO mode operation and table of modes for emergency use.
Instructions for removing and cleaning the front panel of the indoor unit.
Step-by-step guide on how to take down, clean, and reinstall the air filter.
Addresses unit not operating, unusual smells, water sounds, mist, and creaking noise.
Troubleshoots unit not running, poor cooling/heating, remote control, and water leakage.
Deals with indoor unit not delivering air and moisture on the air outlet vent.
Lists severe issues like harsh sounds, odors, leaks, and wiring problems that need immediate professional attention.
Key points regarding qualified personnel, authorized maintenance, and unit removal.
Guidelines on avoiding places that may cause malfunction due to environmental factors.
Specifies the minimum space required around the indoor unit for proper installation.
Specifies the minimum space required around the outdoor unit for proper installation.
Instructions for horizontally mounting the plate and ensuring its firm fixation.
Steps for drilling the wall hole and installing the drain hose with insulating tube.
Steps for connecting power and signal wires between indoor and outdoor units.
Guidelines for power supply, earthing, and disconnection switches for safe electrical installation.
Details on routing piping and wiring from the indoor unit's right, left, or rear sides.
Instructions for aligning and tightening flare nuts for connecting indoor and outdoor unit pipes.
Steps for disassembling the handle, connecting wires, and fixing the power cable.
Procedure for evacuating the system and performing a leakage test using a vacuum pump.
Method for setting up drainage for condensate and defrosting water from the outdoor unit.
Checklist of items to verify before performing the test operation, ensuring proper installation.
Steps for switching on power, selecting modes, and checking normal operation.
Instructions on how to attach the healthy filter onto the air filter and install it.
Guidance on cleaning the healthy filter and information about its general service life.
To Next Page