F3 code is displayed:
- The compressor protection is activated. Turn off the appliance and restart after 30
minutes. If the F3 code is still displayed, contact an authorized service center.
F4 code is displayed:
- The compressor is overloaded or working at low speed. Turn off the appliance and restart
after 30 minutes.
F5 code is displayed:
- The compressor overheating protection is activated. Turn off the appliance, keep it in a
ventilated place and restart after 30 minutes. If the F5 code is still displayed, contact an
authorized service center.
F7/F8 code is displayed:
- Temperature sensor error. Restart the appliance. If the F7/F8 code is still displayed, con-
tact an authorized service center.
To Next Page
Loading...
