Alpine CDE-205DAB - Maintenance

26-EN
ALPINE CDE-205DAB 68-40368Z04-B (EN) 128x182
Specifi
Tuner sec
DAB/DAB
Tuning ran
Antenna (
Extern
FM
Tuning ra
n
Antenna (
Extern
Intermedi
FM CC
+5
0
Usable sen
Selectivity
Signal-to-
Separatio
n
Frequency
MW/LW
Tuning ra
n
MW: 53
LW: 15
Antenna
(
Extern
Sensitivit
y
CD Player
Signal-to-
Frequenc
y
Wow and
Maximu
m
Folder
Files (t
Displa
y
32
Correspo
n
and AA
*1 CD-R/C
*2 includi
*3 may b
e
file nam
About iPod
• You can connect to the following iPod models.
Update your iPod devices to the latest software
before use.
Compatible iPhone/iPod models
Compatible Model Bluetooth®* USB
iPhone 7
iPhone 7 Plus
iPhone SE
iPhone 6s
iPhone 6s Plus
iPhone 6
iPhone 6 Plus
iPhone 5s
iPhone 5c
iPhone 5
iPhone 4s
iPod touch
(6th generation)
iPod touch
(5th generation)
iPod nano
(7th generation)
* CDE-205DAB/ UTE-204DAB only
• Use of the Made for Apple badge means that an
accessory has been designed to connect
specifically to the Apple product(s) identified in
the badge, and has been certified by the
developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards.
Please note that the use of this accessory with
an Apple product may affect wireless
performance.
If you have any questions or problems
concerning your unit that are not covered in this
manual, consult your nearest Alpine dealer.
Maintenance
Clea ning the connectors
The unit may not function properly if the
connectors between the unit and the front panel
are not clean. In order to prevent this, detach the
front panel (page 9) and clean the connectors
with a cotton swab. Do not apply too much force.
Otherwise, the connectors may be damaged.
Notes
• For safety, turn off the ignition before cleaning the
connectors, and remove the key from the ignition
switch.
• Never touch the connectors directly with your fingers
or with any metal device.