STEP 1
A. Flip the Dolly over to install the clip-on release.
The clip-on release must be installed before the
wheels are added.
B. Position the Dolly so the foot pedal is closest to
you; slide the clip-on release under the foot pedal
release so that the hook on the clip-on release is
facing outward on the left side.
The clip-on release should fit securely onto the
base of the caster post.
STEP 2
Place the four caster wheels in the holes located
in each corner and apply light pressure.
1
2
3
4
5
6
9
10
11
12
18
19
20
21
22
23
8
7
ABS
90A/65
SLIM TRASH CAN
DOLLY
ALP477-DOLLY QUICK START GUIDE
THANK YOU FOR YOUR PURCHASE. Known in the industry for excellent products, Alpine Industries is a
manufacturer of innovative, solution-based products for the commercial and institutional markets worldwide.
Combining commitment to the customer, design innovation and skilled, dedicated workforces, they have
produced a range of products that are an essential part of every commercial facility. Every product is designed
to the highest standards, enabling you to get your requirements done in a reliable and cost-eective way.
To Next Page
Need help?
General
