Alpine DVA-9861Ri - Page 65

64-EN
01GB06DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
Removal
1. Remove the detachable front panel.
2. Use a small screwdriver (or similar tool) to push the
locking pin to the “up” position (see above drawing).
As each pin is unlocked, gently pull out on the unit to
make sure it does not re-lock before unlocking the
second pin.
3. Pull the unit out, keeping it unlocked as you do so.
<JAPANESE CAR>
Face Plate
Screws (M5×8)
(Included)
Mounting Bracket
this unit
01GB00DVA9861Ri.book Page 64 Wednesday, December 7, 2005 12:00 PM