Jeep Wrangler
HCE-RCAM-WRA 6/16
Glove Box Removal
1 Open the glove box.
2 Push inwards both left and right sides to release the
glove box out.
Removing B-Pillar Panel
1 Remove B-Pillar panel by disengaging 4 clips on
both front and rear passenger sides.
2 Using panel removing tool, unclip the B-Pillar. Be
careful not to damage the panel.
3 Lift the carpet up on both front and rear passenger
sides to expose the OEM cables.
To Next Page
Loading...