EasyManua.ls Logo

Alpine IDA-X001 - Center Jog Dial Operation

Alpine IDA-X001
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-EN
1
Turn the Center Jog Dial left or right.
aTurn the Center Jog Dial one step. If “Sound (Beep)
Guide Function” is set to On (see page 21), a beep
sounds as this operation is performed. The explanation in
the Manual described as “Turn the Center Jog Dial
describes the above operation. The Center Jog Dial
returns to its original position when it is released.
Additionally, turning the Center Jog Dial one step, and
then turning and holding it for a moment without releasing
it is expressed as “Turn the Center Jog Dial one step and
hold.”
bBy turning the Center Jog Dial and holding it for a
moment without releasing, you can change the number
and items continuously. This operation is expressed as
“Turn the Center Jog Dial two steps and hold.” IfSound
(Beep) Guide Function” is set to On (see page 21), a
beep sounds twice as this operation is performed. The
Center Jog Dial returns to the original position when it is
released.
Center Jog Dial
Operation
Center Jog Dial

Table of Contents

Other manuals for Alpine IDA-X001

Related product manuals