IridlEaiioij~i~~ijj~!:i~~j~l~l~i!iL~t~:
ICurrent Error!
• Abnonnal current
is
run to the USB connector device (an error
message may be displayed if the USB device that
is
not
compatible with the unit
is
connected).
- Attempt to connect another Portable audio player.
IUSB Device Error I
• A Portable audio player that
is
not supported by the unit
is
connected.
- Attempt to connect another Portable audio player.
No USB Device
• A Portable audio player
is
not connected.
- Make sure the Portable audio player
is
correctly connected and
the cable
is
not excessively bent.
No Song
• There are
no
songs
in
the Portable audio player.
- Download songs to the Portable audio player and connect to
this unit.
I No Support I
• Text infonnation that
is
no supported on the unit has been input.
- Use
an
Portable audio player
in
which text infonnation
is
input
that
is
supported on the unit.
Unsupported
• A sampling ratelbit rate not supported
by
the unit
is
used.
- Use a sampling ratelbit rate that
is
supported by the unit.
Protect
• A copy-protected WMA file was played back.
-
You
can only play back non-copy-protected files.
- Make sure the Portable audio player
is
set to
MTP.
Error
01
• Communication error
- Tum the ignition key off, and then set to ON again.
- Verify
in
the display after reconnecting the Portable audio
player to the connection cable.
Error 02
• Caused
by
the Software Version not being compatible with this
unit.
- Update the Portable audio playerSoftware Version. For details,
refer to the Owner's Manual
of
player.
- Reset the Portable audio player.
High Temperature
• Protective circuit is activated due to high temperature.
- The indication will disappear when the temperature returns to
nonnal operating range.
Error
01
• Malfunction
in
the CD Changer.
- Consult your Alpine dealer. Press the magazine eject button and
pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot
be pulled out, consult your Alpine
dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does not eject,
consult your Alpine dealer.
Error 02
• A disc
is
left inside the
CD
Changer.
- Press the eject button to activate the eject function. When the
CD Changer finishes the eject function, insert
an
empty
CD
magazine into the CD Changer to receive the disc left inside
the CD Changer.
No Magazine
• No magazine
is
loaded into the CD Changer.
- Insert a magazine.
No Disc
• No indicated disc.
- Choose another disc.
39-EN
IridlEaiioij~i~~ijj~!:i~~j~l~l~i!iL~t~:
ICurrent Error!
• Abnonnal current
is
run to the USB connector device (an error
message may be displayed if the USB device that
is
not
compatible with the unit
is
connected).
- Attempt to connect another Portable audio player.
IUSB Device Error I
• A Portable audio player that
is
not supported by the unit
is
connected.
- Attempt to connect another Portable audio player.
No USB Device
• A Portable audio player
is
not connected.
- Make sure the Portable audio player
is
correctly connected and
the cable
is
not excessively bent.
No Song
• There are
no
songs
in
the Portable audio player.
- Download songs to the Portable audio player and connect to
this unit.
I No Support I
• Text infonnation that
is
no supported on the unit has been input.
- Use
an
Portable audio player
in
which text infonnation
is
input
that
is
supported on the unit.
Unsupported
• A sampling ratelbit rate not supported
by
the unit
is
used.
- Use a sampling ratelbit rate that
is
supported by the unit.
Protect
• A copy-protected WMA file was played back.
-
You
can only play back non-copy-protected files.
- Make sure the Portable audio player
is
set to
MTP.
Error
01
• Communication error
- Tum the ignition key off, and then set to ON again.
- Verify
in
the display after reconnecting the Portable audio
player to the connection cable.
Error 02
• Caused
by
the Software Version not being compatible with this
unit.
- Update the Portable audio playerSoftware Version. For details,
refer to the Owner's Manual
of
player.
- Reset the Portable audio player.
High Temperature
• Protective circuit is activated due to high temperature.
- The indication will disappear when the temperature returns to
nonnal operating range.
Error
01
• Malfunction
in
the CD Changer.
- Consult your Alpine dealer. Press the magazine eject button and
pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot
be pulled out, consult your Alpine
dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does not eject,
consult your Alpine dealer.
Error 02
• A disc
is
left inside the
CD
Changer.
- Press the eject button to activate the eject function. When the
CD Changer finishes the eject function, insert
an
empty
CD
magazine into the CD Changer to receive the disc left inside
the CD Changer.
No Magazine
• No magazine
is
loaded into the CD Changer.
- Insert a magazine.
No Disc
• No indicated disc.
- Choose another disc.
39-EN
To Next Page
Loading...
