Antenna
Specifications
FM
TUNER SECTION
• The
XM
or SIRIUS antenna is not connected to the
XM
or
SIRIUS radio module.
- Check whether the XM or SIRIUS antenna cable
is
attached
securely to the
XM
or SIRIUS radio module.
Updating
• Radio
is
being updated with latest encryption code.
- Wait until encryption code
is
being updated. Channels 0 and 1
should function normally.
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
AM
TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
87.7-107.9 MHz
9.3
dBf
(0.8IlV175 ohms)
13.5 dBf(1.3IlVI75 ohms)
80
dB
65 dB
35
dB
2.0dB
530-1710 kHz
22.5IlV/27 dB
USB SECTION
USB
requirements
Max. Power Consumption
File System
MP3
Decoding
WMA Decoding
No Signal
(XM
mode)
IAcquiring Signal I
(SIRIUS
mode)
•
XM
or SIRIUS signal
is
too weak at the current location.
- Wait until the car reaches a location with a stronger signal.
Loading
• Radio
is
acquiring audio or program information.
- Wait until the radio has received the information.
Off Air
(XM
mode)
IAcquiring Signal I
(SIRIUS
mode)
USB 1.1/2.0
500mA
FATl2/16/32
MPEG-1I2 AUDIO Layer-3
Windows
Media™
Audio
(WMDRMI0
is
supported)
AAC Decoding AAC-LC format ".m4a" file
Number
of
Channels 2-Channel (Stereo)
Frequency Response* 5-20,000 Hz
(±1
dB)
Total Harmonic Distortion 0.008% (at I kHz)
Dynamic Range 95 dB (at I kHz)
Signal-to-Noise Ratio
105
dB
Channel Separation 85 dB (at I kHz)
* Frequency response may differ depending on the encoder
software/bit rate.
GENERAL
Power Requirement 14.4 V
DC
(11-16 V allowable)
Power Output
18
W RMS x 4*
*Primary amplifier ratings per CEA-2006 Standard
• Power output: measured
at4
Ohms and $
1%
THD+N
• SIN: 80 dBA (reference: I W into 4 Ohms)
Maximum Pre-Output Voltage 2 V
/l
0 k ohms
Weight 1.0
kg
(2
Ibs.
3 oz)
• The channel currently selected has stopped broadcasting.
- Select another channel.
1-------1
• The user has selected a channel number that does not exist or is
not subscribed to.
- The unit will revert back to the previously selected channel.
• There
is
no
artist name/feature, song/program title, or additional
information associated with the channel at that time.
- No action needed.
Error
• If an error or other problem occurs.
- Change channels or consult your Alpine dealer.
CHASSIS SIZE
Width
Height
Depth
NOSEPIECE SIZE
Width
Height
Depth
178
mm (7")
50
mm
(2")
156 mm (6-1/8")
170 mm (6-3/4")
46
mm
(1-13/16")
28 mm (1-118")
DETACHABLE FRONT PANEL SIZE
Width
Height
Depth
108
mm (4-114")
46 mm (1-13/16")
36 mm (1-7/16")
40-EN
• Due to continuous product improvement, specifications
and
design
are subject to change without notice.
Antenna
Specifications
FM
TUNER SECTION
• The
XM
or SIRIUS antenna is not connected to the
XM
or
SIRIUS radio module.
- Check whether the XM or SIRIUS antenna cable
is
attached
securely to the
XM
or SIRIUS radio module.
Updating
• Radio
is
being updated with latest encryption code.
- Wait until encryption code
is
being updated. Channels 0 and 1
should function normally.
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
AM
TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
87.7-107.9 MHz
9.3
dBf
(0.8IlV175 ohms)
13.5 dBf(1.3IlVI75 ohms)
80
dB
65 dB
35
dB
2.0dB
530-1710 kHz
22.5IlV/27 dB
USB SECTION
USB
requirements
Max. Power Consumption
File System
MP3
Decoding
WMA Decoding
No Signal
(XM
mode)
IAcquiring Signal I
(SIRIUS
mode)
•
XM
or SIRIUS signal
is
too weak at the current location.
- Wait until the car reaches a location with a stronger signal.
Loading
• Radio
is
acquiring audio or program information.
- Wait until the radio has received the information.
Off Air
(XM
mode)
IAcquiring Signal I
(SIRIUS
mode)
USB 1.1/2.0
500mA
FATl2/16/32
MPEG-1I2 AUDIO Layer-3
Windows
Media™
Audio
(WMDRMI0
is
supported)
AAC Decoding AAC-LC format ".m4a" file
Number
of
Channels 2-Channel (Stereo)
Frequency Response* 5-20,000 Hz
(±1
dB)
Total Harmonic Distortion 0.008% (at I kHz)
Dynamic Range 95 dB (at I kHz)
Signal-to-Noise Ratio
105
dB
Channel Separation 85 dB (at I kHz)
* Frequency response may differ depending on the encoder
software/bit rate.
GENERAL
Power Requirement 14.4 V
DC
(11-16 V allowable)
Power Output
18
W RMS x 4*
*Primary amplifier ratings per CEA-2006 Standard
• Power output: measured
at4
Ohms and $
1%
THD+N
• SIN: 80 dBA (reference: I W into 4 Ohms)
Maximum Pre-Output Voltage 2 V
/l
0 k ohms
Weight 1.0
kg
(2
Ibs.
3 oz)
• The channel currently selected has stopped broadcasting.
- Select another channel.
1-------1
• The user has selected a channel number that does not exist or is
not subscribed to.
- The unit will revert back to the previously selected channel.
• There
is
no
artist name/feature, song/program title, or additional
information associated with the channel at that time.
- No action needed.
Error
• If an error or other problem occurs.
- Change channels or consult your Alpine dealer.
CHASSIS SIZE
Width
Height
Depth
NOSEPIECE SIZE
Width
Height
Depth
178
mm (7")
50
mm
(2")
156 mm (6-1/8")
170 mm (6-3/4")
46
mm
(1-13/16")
28 mm (1-118")
DETACHABLE FRONT PANEL SIZE
Width
Height
Depth
108
mm (4-114")
46 mm (1-13/16")
36 mm (1-7/16")
40-EN
• Due to continuous product improvement, specifications
and
design
are subject to change without notice.
To Next Page
Loading...
