12-EN
1
Press FUNC./SETUP repeatedly to choose the
percent skip mode.
<When the unit is connected via USB>
Alphabet skip function Percent skip function
Normal search mode Alphabet skip function
<When the unit is directly connected>
Percent skip function Normal search mode
Percent skip function
2
Press and turn the Double Action encoder.
Each turn of the Double Action encoder to the right will jump
10%, 20% and 100% in ascending order.
Each turn of the Double Action encoder to the left will jump
100%, 90% and 10% in descending order.
Scroll bar display example (if 50% is shown)
1
Press FUNC./SETUP to activate the percent
selection mode.
2
Turn the Rotary encoder to select a designated
percent parameter, and then press
/ENTER.
The percent skip function jumps to the following selected
10%
20%…50%…80%…100% 10%.
• The iDA-X300 is available only for the direct connection, and is not
available for the USB connection.
Alphabet Skip Function (Only when
iDA-X200 is connected via USB)
The initial skip function is skipped to the next number, symbol or letter
such as from A to B, B to C.
You can skip in reverse order such as B to A by turning the Double
Action encoder to the left.
1
Press FUNC./SETUP repeatedly to choose the
alphabet skip mode.
Alphabet skip function Percent skip function
Normal search mode Alphabet skip function
2
Press and turn the Double Action encoder.
A list is skipped to the next page or next number, symbol or
letter.
• If the Double Action encoder is pressed and turned to the left or
right, the display continuously changes.
• The Alphabet Skip Function in the song search mode is available
only when a song search is selected on the Menu select screen.
Up/Down Function
If you select an album and press and hold /ENTER in the search
mode, this album will be played back repeatedly. To go to the previous
or next Album, use the Up/Down function.
Press and turn the Double Action encoder to the left.
Returns to the previous item.
Press and turn the Double Action encoder to the
right.
Advances to the next item.
Press and hold /ENTER for at least 2 seconds, then
turn the Rotary encoder to select the desired Playlist/
Artist/Album/Genre/Composer.
• If you do not perform a search or only search for a song name or
audiobook, this function is not valid.
• During an artist search, albums for that artist can be played.
• If an album is selected during an artist search, the Up/Down function
can be used to play other albums by that artist.
• This function is inactive during shuffle playback.
Search Position Memory
During iPod playback, you can quickly return to the last-selected
hierarchy level in the search mode.
1
Press .
The hierarchy you selected last in the search mode is
displayed.
Random Play Shuffle
1
Press FUNC./SETUP.
2
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select M I X,
and press
/ENTER.
The Shuffle mode is activated.
3
Turn t he
Double Action encoder
(iDA-X200 only) or
Rotary encoder
(iDA-X300 only) to select the M I X
(Shuffle) playback mode, and press
/
ENTER
.
4
Press FUNC./SETUP.
The songs will be played back in random sequence.
• If no operation is performed for 10 seconds, the unit will return to
normal mode.
• To cancel, select OFF in the above procedure.
• Shuffle Album/Shuffle Song works the same way as iPod Shuffle
Albums/Shuffle Songs.
By using this function on iDA-X200
By using this function on iDA-X300
scroll bar
By using this function on iDA-X200
By using this function on iDA-X300
M I X ALBUM : An album in the iPod is selected at
random, and is played back in the
album song order.
SONG : If you select a song in the search
mode, all songs in the selected
mode are played back at random.
OFF : Shuffle mode off.
To Next Page
Loading...
