&cAUTION
This symbol means important instructions. Failure
to
heed them
can
result in injury
or
material
property damage.
HALT
USE
IMMEDIATELY
IF
A
PROBLEM
APPEARS.
Failure to
do
so may cause personal injury
or
damage to the product.
Return it to your authorized Alpine dealer
or
the nearest Alpine Service
Center for repairing.
HAVE
THE
WIRING
AND
INSTALLATION
DONE
BY
EXPERTS.
The wiring
and
installation
of
this unit requires special technical skill
and experience.
To
ensure safety, always contact the dealer where you
purchased this product to have the work done.
USE
SPECIFIED
ACCESSORY
PARTS
AND
INSTALL
THEM
SECURELY.
Be
sure to use only the specified accessory parts. Use
of
other
than
designated parts may damage this unit internally
or
may not securely
install
the
unit in place. This may cause parts to become loose resulting
in
hazards
or
product failure.
ARRANGE
THE
WIRING
SO
IT
IS
NOT
CRIMPED
OR
PINCHED
BY
A
SHARP
METAL
EDGE.
Route the cables
and
wiring away from moving parts (like the seat rails)
or
sharp
or
pointed edges. This will prevent crimping and damage to the
wiring. If wiring passes through a hole in metal, use a rubber grommet
to prevent the wire's insulation from being cut by the metal edge
of
the
hole.
DO
NOT
INSTALL
IN
LOCATIONS
WITH
HIGH
MOISTURE
OR
DUST.
Avoid installing the unit in locations with high incidence
of
moisture
or
dust. Moisture
or
dust that penetrates into this unit may result in
product failure.
I
3-EN
To Next Page
Loading...
