Alpine iLX-F309 - Language Setting; Picture Quality Setup; Selecting the Visual EQ Mode (Factorys Setting); Adjusting Brightness

36-EN
Language Setting
The Setup menu, feedback information, etc. for this unit can be changed
to appear in the selected language.
Setting item:
Language
*1
(Language
*2
)
Setting contents:
*1 Display in the currently selected language.
*2 Always display in English.
Picture Quality Setup
[Picture Quality] is selected on the General Setup Menu screen in step
1. See “General Setup” (page 29).
You can set up items related to an image.
Settable items differ depending on the application.
[Video] (Video media)*
3
:
Visual EQ / Brightness / Color / Tint / Contrast / Sharpness
[Camera]*
4
:
Brightness / Color / Contrast
*3 “Video” can be selected while a video is playing.
*4 The camera names are not displayed when “Off” is set (page 43).
You can select a mode suitable for the subject image.
Setting item:
Visual EQ
Setting contents:
Off (Initial setting) / Night / Soft / Sharp / Contrast
• To return to the default video settings, set this function to Off. Any
Visual EQ selection or changes made are reset their initial settings.
Setting item:
Brightness
Setting content:
-15 to +15 (Initial setting: 0)
You can adjust the brightness between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display shows
“MIN” or “MAX” respectively.
Setting item:
Color
Setting content:
-15 to +15 (Initial setting: 0)
You can adjust the color between MIN (-15) and MAX (+15). When it
reaches the minimum or maximum point, the display shows “MIN” or
“MAX” respectively.
Setting item:
Tint
Setting content:
R15 to G15 (Initial setting: 0)
Adjust the Color from R15 to G15.
Setting item:
Contrast
Setting content:
-15 to +15 (Initial setting: 0)
You can adjust the contrast between MIN (-15) and MAX (+15). When
it reaches the minimum or maximum point, the display shows “MIN”
or “MAX” respectively.
Setting item:
Sharpness
Setting content:
-5 to +5 (Initial setting: 0)
Picture quality adjustment range is -5 to +5. “SOFT” and “HARD”
appear as the minimum and maximum values specified.
When adjusting audio (video media), you can store the settings made for
“Adjusting Brightness, Color, Tint, Contrast and Sharpness.”
Setting item:
Preset 1 / Preset 2
1 After completing “Adjusting Brightness, Color, Tint,
Contrast and Sharpness” (page 36), touch and hold
[Preset 1] or [Preset 2] to save the settings.
2 Tou ch [Preset 1] or [Preset 2] to call the saved settings.
Selecting the Visual EQ Mode
(Factory’s setting)
Off: Initial Setting
Night: Suitable for movies in which dark scenes frequently
appear.
Soft: Suitable for CGs and animated films.
Sharp: Suitable for old movies where images are not clearly
shown.
Contrast: Suitable for recent movies.
Adjusting Brightness
Adjusting Color of Picture
Adjusting Tint of Picture
Adjusting Image Contrast
Adjusting Picture Quality
Saving and calling the adjusted picture
quality