Alpine iLX-F309E - AUX Setup; Switching the Visual Input Signal System; Apple CarPlay Setup

42-EN
01GB05iLX-F309E.fm
ALPINE iLX-F309E 68-34732Z79-A (EN)
You can make this setting only when AUX is set to “On” ( ). See “AUX
Setup” (page 41).
Setting item:
Signal
Setting contents:
Auto (Initial setting) / NTSC/PAL
HDMI Setup
[HDMI] is selected on the Sources Setup Menu screen in step 1. See
“Sources Setup” (page 39).
You can set the name of an external device connected via HDMI.
Setting item:
HDMI
Setting contents:
HDMI (Initial setting) / DVD
Apple CarPlay Setup
[Apple CarPlay] is selected on the Sources Setup Menu in step 1. See
“Sources Setup” (page 39).
Before connecting an iPhone 5 or later, turn on this item to use the
Apple CarPlay function.
Setting item:
Apple CarPlay
Setting contents:
On (Initial setting) / Off
• This setting is invalid for music playing of iPhone 4S and iPod.
[System] is selected on the Setup main screen in step 3. See “Setup
Operation” (page 26).
System Setup Menu screen
<Setting items>
*1 When Camera Select is set to “Off,” you cannot select this item.
*2 CAN-I/F BOX should be connected before this operation.
*3 Set this setting after closing the Alpine TuneIt App.
1 Select the desired item.
2 To switch the setting, touch [], [], [], [], or mark the
checkboxes “Off” ( ) or “On” ( ).
• If “ ” appears, there is a further hierarchy. Touch the desired
item.
3 Tou ch [] to return to the main source screen.
• To return to the previous List screen, touch [] or [] in the
previous page. For details, see “About Basic Operation for List
Screen” (page 16).
Switching the Visual Input Signal System
Auto: The video input signal type (NTSC or PAL) will be
automatically selected.
NTSC/PAL: Choose the video input signal type manually.
HDMI: Set when a smartphone is connected via HDMI.
DVD: Set when an external DVD player is connected.
On: Set before an iPhone 5 or later is connected, the Apple
CarPlay can be used but all apps may not be available on
your device.
Off: Set when you want to use the iPod source, etc., of the
connected iPhone 5 or later.
System Setup
Camera
Camera Select
Camera Signal*
1
Guide Adjustment*
1
Interrupt (Power OFF)*
1
CAN-I/F*
2
Default Vehicle Screen
Climate screen interrupt time
Parking sensor interrupt
Unit
External AP
Application
Alpine TuneIt App*
3
The following steps 1 to 3 are common to each “Setting
item” of System Setup. See each section for details.
01GB00iLX-F309E.book Page 42 Friday, December 22, 2017 2:38 PM