7-EN
4 Adjust the mounting position of the display.
• The available adjustment positions of the Display differ depending on
the front-back/up-down/angle positions. Consult “Position Adjustment
and Mounting Dimensions of the Display” (page 18) for details.
1) Hold the Display up vertically, remove the 4 flush head
screws (M4×13) on the left and right sides for up-down
adjustment, and adjust the up-down position of the display.
2) After adjustment, tightly fix the display with the 4 Flush head
screws (M4×13) for up-down adjustment.
3) Adjust the angle of the display.
Flush head screw (M4×13)
(left and right)
Flush head screw (M4×13)
(left and right)
0°
-20°
45°
20°
To Next Page
Loading...
