115-EN
Changing the Device information
[Device info] is selected on the Phone setup menu in step 4. See “Phone
Setup Operation” (page 114).
You can change the device name of the system.
Setting item: Edit device name
1
Touch [Edit] in the Device information screen.
Edit device name screen is displayed.
2
Enter the device name.
The initial name is INE-S900R.
3
Touch [OK] to memorize the name.
• You can enter a device name of up to 20 digits.
You can change the device passcode of the system.
Setting item: Edit device passcode
1
Touch [Edit] in the Device information screen.
Edit this device passcode screen is displayed.
2
Enter the device passcode.
The initial passcode is 1234.
• Enter the 4-digit number.
3
Touch [OK] to memorize the passcode.
BLUETOOTH Setup
[BLUETOOTH setup] is selected on the Phone setup menu in step 4.
See “Phone Setup Operation” (page 114).
You can set whether the INE-S900R can be recognized or not from a
BLUETOOTH compatible device. Normally set this to On.
Setting item: Visible mode
Setting contents: On (Initial setting) / Off
On: Enable recognition of the INE-S900R from the
BLUETOOTH compatible device.
Off: Disable recognition of the INE-S900R from the
BLUETOOTH compatible device.
Editing device name
Editing device passcode
Setting the Search Mode
Downloaded from Caradio-Manual.com Manuals
To Next Page
Loading...
