Alpine INE-W611D - Audio System Defeat and Key Sound; Disabling Features and Adjusting Key Sound Volume

69 -EN
1. In the Setup screen, touch [Time Correction].
2. Touch the Correction Mode button and select the mode.
Each time the button is pressed, mode is changed from ms, inch and
cm.
3. Touch [
-
] or [
+
] for each speaker to adjust the time or
distance.
0.0 msec to 9.9 msec (0.1 msec/step)
0.0 cm (0.0 inch) to 336.6 cm (132.7 inch) (3.4 cm/step)
All speaker setting values are adjustable in the range of 15 ms or
510 cm.
4. To store the adjusted setting value, touch and hold [Preset 1],
[Preset 2], or [Preset 3] for at least 2 seconds.
• Touch [Flat] to set all values to 0.0.
• If the Subwoofer setting is “Off,” the Subwoofer setting cannot be
edited.
Calling the Time Correction Value
Calling the pre-set time correction value.
Touch [Preset 1], [Preset 2], or [Preset 3] on the time correction
screen.
The setting stored in the Preset will be recalled.
Setting Defeat
Defeat is “On,” MX HD and Equalizer Presets features are turned off.
This disables any settings made for these functions.
Check the [Off] box to turn the feature on.
Uncheck the [On] box to turn the feature off.
Setting Key Sound
You can change the volume of the sound heard when a button is
touched.
Adjust the sound level from 0 to 6.