Tuning
in
to
Categorized
Programs
Checking
the
SAT
Radio
ID
Number
Quickly find a group
of
channels
in
a desired category. The categories
are listed in the order designated
by
SIRIUS or
XM
Radio.
In the
XM
or SIRIUS mode, touch
['f
CAn
or
[CAT
A]
to
select a desired category.
The first channel of the selected category is tuned.
A unique Radio ID number is required to subscribe to SAT Radio
programming. Each third
pany
XM
or SIRIUS radio comes with this
number.
XMRsdlo:
This number is an 8 character alphanumeric number. It is printed on a
label found on the SAT Receiver.
•
If
the desired category program is notfound. the ,,--------" is
displayed
for
2 seconds, then the receiving program is restored.
SIRIUS Rsdlo:
This number is a l2-digit numeric number. It is printed on a label found
on the SAT Receiver.
Changing
the
Display
It can also be displayed on the screen
of
the
IVA-D1
06 in the following
way.
SIRIUS mode:
•
You
cannot use
"0,"
"S," " I,"
or
"F"
for
the
ID
Number. (XM radio
Receiver only)
•
You
can check the ID number printed on a label on your third party,
SAT Radio Receiver package.
Storing
Channel
Presets
1 Touch
[P1/3]
after selecting a desired band.
The Function Guide is switched.
2 Touch and hold
anyone
of the preset buttons
[P.SET
1]
through
[P.SET
6]
for at least 2 seconds.
The selected channel is stored.
3 Repeat the procedure to store up to 5 other channels
onto the same band.
To
use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 18 channels can be stored
in
the preset memory
(6 channels for each band;
XM1,
XM2
and
XM3
or SIRIUS1,
SIRIUS2 and SIRIUS3
).
1 While receiving SAT Radio, touch [
...
NO.]
or
[NO.
~]
to select channel
"0"
for XM and channel
"255" for SIRIUS.
The unit display the
ID
number.
2 The unit displays the
10
number.
3
To
cancel the
10
number display, change the
channel.
-----,\*1
Information
!oil!
1-_-.1
display
Touch
[INFO.]
on the XM or SIRIUS mode main screen.
Each time you touch this button, the display changes as shown
below.
XMmode:
Song
name!
IComposer
name!
*1
Channel name. category, title name, etc
..
are displayed in one screen.
*2
If
the display
of
Auxiliary Data Field characters exceeds the screen,
touch [INFO.] to continue the display.
Text information. such as the channel name. anist name/feature. and
song/program title. is available with each
XM
or SIRIUS channel. The
unit can display this text information as explained below.
•
If
you store a channel in a preset already being used, the current
channel will be replaced with the new one.
Receiving
Stored
Channels
1 Touch
[P1/3]
after selecting a desired band.
The Function Guide is switched.
2 Touch
anyone
of the preset buttons
[P.SET
1]
through
[P.SET
6]
that has your desired satellite
channel in memory.
60-EN
To Next Page
Loading...
