34-EN
If a disc containing both a compressed video file and a compressed
audio file is used, you have a choose to play back only a video or only
audio.
Setting item: DVD PLAY MODE
Setting contents: VIDEO / AUDIO
When using discs containing both audio data and MP3/WMA/AAC
data.
Setting item: FILE PLAY MODE
Setting content: CD / CMPM
• If a disc is inserted, remove it from this unit before setting.
• When an MP3-compatible CD changer is used, this setting cannot be
applied.
Setting item: DivX INFO.
If [ ] of DivX INFO. is touched, a DivX
®
file registered
code is displayed.
When playing a Playback Control (PBC) enabled Video CD, you can
choose to set PBC ON or OFF.
Setting item: PBC
Setting contents: OFF / ON
Radio Setup Operation
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [ ] of SOURCE SETUP.
The SOURCE SETUP screen appears.
3
Touch [ ] of RADIO SETUP.
The RADIO setup screen appears.
4
Touch [ ] or [ ] of the desired item to change its
setting.
Setting items:
RDS CLOCK DISP / FM LEVEL / PI SEEK / RDS REGIONAL /
PTY LANGUAGE / PTY31
5
Touch [RETURN] to return to the previous screen.
When ON is selected, the clock is adjusted automatically based on the
time data sent from the RDS broadcast.
Setting item: RDS CLOCK DISP
Setting content: OFF / ON
Setting the compressed File Playback Data
VIDEO: only VIDEO data is played back.
AUDIO: only AUDIO data is played back.
Playing MP3/WMA/AAC Data
CD: Plays only the audio data on discs containing both audio
data and MP3/WMA/AAC data.
CMPM:Plays only the MP3/WMA/AAC files on discs containing
both audio data and MP3/WMA/AAC data.
Displaying DivX
®
Disc Information
Setting the Video CD Play Mode
OFF: The PBC menu is not displayed.
ON: The PBC menu is displayed.
RADIO Setup
The Parking Brake must be engaged to access the RADIO
mode screen. Attempting to access this screen while driving
will display the warning-CAN’T OPERATE WHILE DRIVING.
The following steps 1 to 5 are common operations to each
“Setting item” of Radio Setup. Refer to each section for details.
RDS Time Display
ON: Adjust the clock automatically based on the time data. In
this case, the clock cannot be adjusted manually.
To adjust it manually, select OFF.
To Next Page
Loading...
