39-EN
Outputs the picture/Sound of the source selected on the IVA-D106R
connected to the rear monitor.
Setting item: AUX OUT
Setting content: OFF / ON
Setting item: BLUETOOTH IN
Setting contents: OFF / NAV. / ADAPTER
• For details on Bluetooth operation, refer to the Owner’s Manual of
the Bluetooth Box.
• If a Bluetooth Box compatible with the Voice-Dial function is
connected, the Voice-Dial function can be used.
If a USB Adapter is to be used, set to ON.
Setting item: USB ADAPTER
Setting content: OFF / ON
• If ON is set even when a CD changer is connected, the source name
on the SOURCE selection screen will change from CD CHG to USB.
Setting item: VISUAL KEY
Setting content: VISUAL / NAV.
Setting item: ILLUMI. COLOR
Setting content: BLUE / RED
To connect an audio processor using the optical digital output, set to
“ON” by the following procedure.
Setting item: OPTICAL OUT
Setting contents: OFF / ON
• Afterwards, set ACC to OFF once, then turn it ON again. The setting
of Digital Output is decided.
The setting is made if AUX+ is selected in “Setting for iPod
Connection” (
page 38).
Setting item: AUX+ LEVEL
Setting contents: LOW / HIGH
Setting the Picture/Sound Output
ON: The “REAR” item is displayed on the Source Selection
screen.
Touch [REAR] to change to the REAR select screen, then
touch the desired source. The selected source picture is
output on the rear monitor.
OFF: The “REAR” item is not displayed on the SOURCE select
screen.
Setting the Bluetooth Connection
(Bluetooth IN)
OFF: Select to ignore any external interrupts.
NAV.: Select when an optional Portable Navigation is
connected.
Change voice line to RCA when TEL rings.
ADAPTER: Select when an optional Bluetooth box is
connected.
When external interruption occurs, the display
changes to the TEL screen.
A source name of TEL on the SOURCE selection
screen is displayed.
Setting the USB Adapter to ON/OFF
OFF: Does not display the USB source name on the SOURCE
selection screen.
ON: Displays the USB source name on the SOURCE selection
screen.
Setting the VISUAL Button
NAV.: Switches directly to the navigation screen by touching
[VISUAL] on the main source screen or pressing
VISUAL on the unit. (Only when an Alpine optional
RGB Navigation is connected.)
VISUAL: Recalls the VISUAL selection screen by touching
[VISUAL] on the main source screen or pressing
VISUAL on the unit.
Changing the Lighting Colour of Buttons
BLUE: Lighting colour is blue.
RED: Lighting colour is red.
Setting the Digital Output
Setting the AUX+ Level
LOW: Decreases the external input audio level.
HIGH: Increases the external input audio level.
To Next Page
Loading...
