75-EN
Connections
• Set the system switch to “NORM” when only a changer is connected (when the Ai-NET compatible equalizer is not used).
When the IMPRINT audio processor is connected, set to EQ/DIV position.
* The system switches are located on the right of the unit (if the front panel is viewed from the front).
*
EQ/DIVNORM
(Red)
To iPod
CD Changer
(Sold Separately)
Amplifier
Amplifier
Amplifier
Rear Left
Rear Right
Front Left
Front Right
Subwoofers
(Yellow)
To Audio output
terminals (R, L)
To Audio input
terminals (R, L)
To Video output
terminal
To video input
terminal
(White)
(Yellow)
(Red)
(White)
(Yellow)
REVERSE (Orange/White)
REMOTE IN (White/Brown)
REMOTE OUT (White/Brown)
To plus side of the
back lamp signal lead
of the car
To remote output lead
To remote input lead
To back-up camera or
To steering remote
control interface box
Antenna
ISO Antenna Plug
To amplifier or equalizer
To power antenna
To vehicle phone
To the parking brake signal lead
Battery
Ignition key
Front left
Rear left
Rear right
Front right
Speakers
(Blue/White)
(Blue)
(Pink/Black)
(Yellow/Blue)
(Yellow)
(Black)
(Red)
(Green)
(Green/Black)
(White/Black)
(Grey)
(Violet/Black)
(Violet)
AUDIO INTERRUPT IN
REMOTE TURN-ON
PARKING BRAKE
ACC
GND
POWER ANT
BATTERY
(Grey/Black)
(White)
To
To Next Page
Loading...
