Other
Useful
Features
Adjusting
the
Audio
1 Touch
[SETUP]
on the main source screen.
The SETUP selection screen is displayed.
2 Touch
[AUDIO
SETUP].
The AUDIO SETUP screen appears.
Display
Example
for
Audio
Adjustment
SCreen
~I~~l
AUDIO
SETtJP;m.
•
BALANCE/FADER.
2.
BAssrREBLE
H.P.F
.,.
£II
SUBWOOFER
!lID
NAY.
M X l...EYEL.
• Touching {
.]
or
{"
] will scroll the list one line
at
a time.
• Touching {
iJ
or
["
] will scroll the list one page
at
a time.
• Touching {ESC] will change to the main source screen.
• The A.PROCESSOR menu items will differ depending on which
optional audio processor is connected. The IMPRINTaudio
processor (PXA-H
1(0)
or
External Audio processors may
be
used.
For details, refer to "IMPRINTOperation (Optional)" (page 50)
or
"External Audio Processor (Optional)" (page 43).
Adjusting BalanceJFader
Touch
[»
] of BALANCEIFADER, the adjusting screen
of
BALANCE/FADER will
be
displayed.
Display
Example
for
BALANCEIFADER
Screen
® Adjusting the Fader
Touch
[F]
or
[R]
to adjust the volume of the front and
rear speakers.
Setting range: F15 to R15
•
If
an IMPRINTaudio processor (PXA-HI
(0)
is connectedto this unit
and
you have set the 2.2ch (3WAY)14.2ch (FRONTIREARISUBW)
switch
of
the IMPRINTaudio processor (PXA-HIOO) to 2.2ch
(3WAY), you cannot adjust the FADER mode. For details, refer to the
Owner's Manual
of
PXA-H100.
® Adjusting the Balance
Touch
[L]
or
[R]
to adjust the sound volume
of
the left
and right speakers.
Setting range: L
15
to R15
26-EN
© Adjusting the Balance/Fader Directly
Touch and move
[0
] to a desired setting.
Or touch a desired setting range, and [ 0 ] will move to that
location,
Touch [L] or [R] of Balance and [F] or [R] of Fader for fine-tuning.
Turning Defeat ON or OFF
Touch
[,,]
to display the DEFEAT adjusting screen.
Touch
[~]
or
[~
] of
DEFEAT
to set to ON
or
OFF.
If
you set the defeat to ON,
MX
of an external audio processor is
turned OFF and
EO
is
returned to the initial setting.
Adjusting
NAV.
MIX Level
Touch
[~]
or
[~]
of
NAV.
MIX LEVEL to adjust the
volume of navigation interruption.
Setting range: ato
15
• This adjustment becomes available when
NAV.
MIX is turned on
in
"Setting the Navigation Interruption" (page 38).
• The setting navigation interruption is not displayed
ifan external
audio processor not compatible with
NAV.
MIX is connected.
Adjusting the Subwoofer Level
Touch
[~]
or
[~]
of
SUBWOOFER to set the subwoofer
ON/OFF.
Touch
[»
]to display the SUBWOOFER output adjusting screen
after setting the SUBWOOFER to ON.
Touch
[~]
or
[~]
to adjust the SUBWOOFER output.
Setting range: 0 to
15
• When an external processor is connected, the display changesfrom
"SUBWOOFER" to the
"SUBWLV"
item.
You
can change the
subwoofer output level between 0
and
15
by
touching
[~
]
or
(~
].
• The SUBWOOFER SYSTEM, SUBWOOFER PHASE
and
SUBWOOFER CHANNEL
may
be set when
an
optional IMPRINT
audio processor (PXA-HIOO)
is connected, SUBWOOFER is set to
ON,
and
MultEQ
OFF
mode is selected. For details, refer to "Setting
the Subwoofer" on page 54.
Adjusting H.P.F. (Highpass Filter)
Touch
[»
] to display the H.P.F. adjusting screen.
Touch
[~]
or
[~
] of the desired speaker.
Setting range:
OFF,
80 Hz, 120 Hz, 160 Hz
• Select
OFF
when no adjustment is required.
• When an external processor
or
IMPRINT audio processor
(PXA-H
1(0)
is connected, the display changes from "H.P.F." to the
"A. PROCESSOR " item.
For
"A.PROCESSOR" operation, refer to
"External Audio Processor (optional)" on page
43
or
"IMPRINT
Operation (Optional) on page 50.
Adjusting BasslTreble
You
can change the bassltreble frequency emphasis to
create your own tonal preference.
Touch
[»
]to
display the Bassrrreble adjusting screen,
Touch
[A]
or
["
] on the scroll bar to scroll the setup items line
by
line.
• Adjustmentcannot be
pet/ormed
when an external audio processor is
connected
and
DEFEAT is set to ON.
Setting the Bass level
You can emphasize or weaken the bass frequency.
Touch
[~]
or
[~
] of BASS LEVEL to select the desired bass
level.
Setting range:
-7
to +7
Other
Useful
Features
Adjusting
the
Audio
1 Touch
[SETUP]
on the main source screen.
The SETUP selection screen is displayed.
2 Touch
[AUDIO
SETUP].
The AUDIO SETUP screen appears.
Display
Example
for
Audio
Adjustment
SCreen
~I~~l
AUDIO
SETtJP;m.
•
BALANCE/FADER.
2.
BAssrREBLE
H.P.F
.,.
£II
SUBWOOFER
!lID
NAY.
M X l...EYEL.
• Touching {
.]
or
{"
] will scroll the list one line
at
a time.
• Touching {
iJ
or
["
] will scroll the list one page
at
a time.
• Touching {ESC] will change to the main source screen.
• The A.PROCESSOR menu items will differ depending on which
optional audio processor is connected. The IMPRINTaudio
processor (PXA-H
1(0)
or
External Audio processors may
be
used.
For details, refer to "IMPRINTOperation (Optional)" (page 50)
or
"External Audio Processor (Optional)" (page 43).
Adjusting BalanceJFader
Touch
[»
] of BALANCEIFADER, the adjusting screen
of
BALANCE/FADER will
be
displayed.
Display
Example
for
BALANCEIFADER
Screen
® Adjusting the Fader
Touch
[F]
or
[R]
to adjust the volume of the front and
rear speakers.
Setting range: F15 to R15
•
If
an IMPRINTaudio processor (PXA-HI
(0)
is connectedto this unit
and
you have set the 2.2ch (3WAY)14.2ch (FRONTIREARISUBW)
switch
of
the IMPRINTaudio processor (PXA-HIOO) to 2.2ch
(3WAY), you cannot adjust the FADER mode. For details, refer to the
Owner's Manual
of
PXA-H100.
® Adjusting the Balance
Touch
[L]
or
[R]
to adjust the sound volume
of
the left
and right speakers.
Setting range: L
15
to R15
26-EN
© Adjusting the Balance/Fader Directly
Touch and move
[0
] to a desired setting.
Or touch a desired setting range, and [ 0 ] will move to that
location,
Touch [L] or [R] of Balance and [F] or [R] of Fader for fine-tuning.
Turning Defeat ON or OFF
Touch
[,,]
to display the DEFEAT adjusting screen.
Touch
[~]
or
[~
] of
DEFEAT
to set to ON
or
OFF.
If
you set the defeat to ON,
MX
of an external audio processor is
turned OFF and
EO
is
returned to the initial setting.
Adjusting
NAV.
MIX Level
Touch
[~]
or
[~]
of
NAV.
MIX LEVEL to adjust the
volume of navigation interruption.
Setting range: ato
15
• This adjustment becomes available when
NAV.
MIX is turned on
in
"Setting the Navigation Interruption" (page 38).
• The setting navigation interruption is not displayed
ifan external
audio processor not compatible with
NAV.
MIX is connected.
Adjusting the Subwoofer Level
Touch
[~]
or
[~]
of
SUBWOOFER to set the subwoofer
ON/OFF.
Touch
[»
]to display the SUBWOOFER output adjusting screen
after setting the SUBWOOFER to ON.
Touch
[~]
or
[~]
to adjust the SUBWOOFER output.
Setting range: 0 to
15
• When an external processor is connected, the display changesfrom
"SUBWOOFER" to the
"SUBWLV"
item.
You
can change the
subwoofer output level between 0
and
15
by
touching
[~
]
or
(~
].
• The SUBWOOFER SYSTEM, SUBWOOFER PHASE
and
SUBWOOFER CHANNEL
may
be set when
an
optional IMPRINT
audio processor (PXA-HIOO)
is connected, SUBWOOFER is set to
ON,
and
MultEQ
OFF
mode is selected. For details, refer to "Setting
the Subwoofer" on page 54.
Adjusting H.P.F. (Highpass Filter)
Touch
[»
] to display the H.P.F. adjusting screen.
Touch
[~]
or
[~
] of the desired speaker.
Setting range:
OFF,
80 Hz, 120 Hz, 160 Hz
• Select
OFF
when no adjustment is required.
• When an external processor
or
IMPRINT audio processor
(PXA-H
1(0)
is connected, the display changes from "H.P.F." to the
"A. PROCESSOR " item.
For
"A.PROCESSOR" operation, refer to
"External Audio Processor (optional)" on page
43
or
"IMPRINT
Operation (Optional) on page 50.
Adjusting BasslTreble
You
can change the bassltreble frequency emphasis to
create your own tonal preference.
Touch
[»
]to
display the Bassrrreble adjusting screen,
Touch
[A]
or
["
] on the scroll bar to scroll the setup items line
by
line.
• Adjustmentcannot be
pet/ormed
when an external audio processor is
connected
and
DEFEAT is set to ON.
Setting the Bass level
You can emphasize or weaken the bass frequency.
Touch
[~]
or
[~
] of BASS LEVEL to select the desired bass
level.
Setting range:
-7
to +7
To Next Page
Loading...
