This function can help restrict the viewing
of
movies to children
of
appropriate age levels only.
Setting item: PARENTAL
Setting content: INPUT
• When the settings are changed, the old settings are overwritten.
Make a note
of
the current settings before making changes. The
memory is cleared when the vehicle's battery is disconnected.
• On unrated DVDs, playback will not be restricted even
ijthe
rating
level is set.
•
If
you want to play back DVD software with the parental lock feature
and its use is currently restricted, change the rating level and the
country number in order to play back the DVD.
• Once set, this rating level remains in memory until changed.
To
enable playback
of
discs
of
higher rating levels
or
to cancel the
parental lock, the setting must be changed.
• Not all DVDs provide a Parental Lockfeature.
If
you are unsure
about a DVD, play itfirst to confirm. Do not leave DVDs accessible
to young children
for
whom you deem them inappropriate.
1 Touch [INPUT].
The numeric
keypad
screen is displayed.
2 Touch the numeric keypad to input a 4-digit password.
The initial number is 1111. Input number are displayed
as
"*".
3 Touch [ENT] to memorize the number.
The PARENTAL screen appears.
Set
the rBtlng level
of
PARENTAL
4 Touch
[~l
of PARENTAL to turn on.
5 Touch
[~l
or
[~l
of PARENTAL LEVEL to select the rating
level
(1
to 8).
Select "OFF" to cancel the parental lock or if you
do
not
want to set a rating level. The smaller the number, the
higher the rating level.
6 Touch
[~l
to return to the previous screen.
ChBnging the
pBSSWOrd
4 Touch [INPUT] of PASSWORD CHANGE.
The numeric keypad screen is displayed.
5 Touch the input screen to enter a new 4-digit password.
• Keep a note
of
the number somewhere safe in case you should
forget
it.
6 Touch [ENT] to memorize the number.
7 Touch
[~l
to return to the previous screen.
ChBnging the rBtlng level temporBrlly
Some
discs may request that you change
the
rating level set
in
the
default settings during playback.
In
this case,
the
message
appears
on
the
monitor screen
"PARENTAL
LEVEL
CHANGE
OK?
[YES] [NO]."
If
this screen appears, change the level
as
follows:
•
To
change parental level
and
play, touch (YES).
When
(YES)
is touched, the numeric keypad input screen is
displayed. Input the 4-digit password in "Setting the Rating Level
(Parental Lock)" you set, then touch {ENT].
•
To
play without
changing
the parental level, touch (NO).
(When
(NO)
is touched. playback will be
at
the parental level set
in "Setting the Rating Level (Parental Lock).")
Use the following procedure to set the digital audio signal output from
the IVA-W505.
Setting item: DIGITAL OUTMODE
Settmgcon~nB:AUnoILPCM
AUTO:
The
digital output
is
switched automatically according
to
the
type
of
audio signals being played.
Be
sure
to
select "AUTO" when you want
to
connect a
digital audio processor
and
play Dolby Digital audio.
"AUTO"
is
the
factory setting.
LPCM:
The
audio signals recorded
on
the
disc
are
converted
to
48
kHz/16 bit (for
DVDs)
or
44.1
kHz
(for Video
CDs
and CDs) linear
PCM
audio signals
for
output.
31-EN
This function can help restrict the viewing
of
movies to children
of
appropriate age levels only.
Setting item: PARENTAL
Setting content: INPUT
• When the settings are changed, the old settings are overwritten.
Make a note
of
the current settings before making changes. The
memory is cleared when the vehicle's battery is disconnected.
• On unrated DVDs, playback will not be restricted even
ijthe
rating
level is set.
•
If
you want to play back DVD software with the parental lock feature
and its use is currently restricted, change the rating level and the
country number in order to play back the DVD.
• Once set, this rating level remains in memory until changed.
To
enable playback
of
discs
of
higher rating levels
or
to cancel the
parental lock, the setting must be changed.
• Not all DVDs provide a Parental Lockfeature.
If
you are unsure
about a DVD, play itfirst to confirm. Do not leave DVDs accessible
to young children
for
whom you deem them inappropriate.
1 Touch [INPUT].
The numeric
keypad
screen is displayed.
2 Touch the numeric keypad to input a 4-digit password.
The initial number is 1111. Input number are displayed
as
"*".
3 Touch [ENT] to memorize the number.
The PARENTAL screen appears.
Set
the rBtlng level
of
PARENTAL
4 Touch
[~l
of PARENTAL to turn on.
5 Touch
[~l
or
[~l
of PARENTAL LEVEL to select the rating
level
(1
to 8).
Select "OFF" to cancel the parental lock or if you
do
not
want to set a rating level. The smaller the number, the
higher the rating level.
6 Touch
[~l
to return to the previous screen.
ChBnging the
pBSSWOrd
4 Touch [INPUT] of PASSWORD CHANGE.
The numeric keypad screen is displayed.
5 Touch the input screen to enter a new 4-digit password.
• Keep a note
of
the number somewhere safe in case you should
forget
it.
6 Touch [ENT] to memorize the number.
7 Touch
[~l
to return to the previous screen.
ChBnging the rBtlng level temporBrlly
Some
discs may request that you change
the
rating level set
in
the
default settings during playback.
In
this case,
the
message
appears
on
the
monitor screen
"PARENTAL
LEVEL
CHANGE
OK?
[YES] [NO]."
If
this screen appears, change the level
as
follows:
•
To
change parental level
and
play, touch (YES).
When
(YES)
is touched, the numeric keypad input screen is
displayed. Input the 4-digit password in "Setting the Rating Level
(Parental Lock)" you set, then touch {ENT].
•
To
play without
changing
the parental level, touch (NO).
(When
(NO)
is touched. playback will be
at
the parental level set
in "Setting the Rating Level (Parental Lock).")
Use the following procedure to set the digital audio signal output from
the IVA-W505.
Setting item: DIGITAL OUTMODE
Settmgcon~nB:AUnoILPCM
AUTO:
The
digital output
is
switched automatically according
to
the
type
of
audio signals being played.
Be
sure
to
select "AUTO" when you want
to
connect a
digital audio processor
and
play Dolby Digital audio.
"AUTO"
is
the
factory setting.
LPCM:
The
audio signals recorded
on
the
disc
are
converted
to
48
kHz/16 bit (for
DVDs)
or
44.1
kHz
(for Video
CDs
and CDs) linear
PCM
audio signals
for
output.
31-EN
To Next Page
Loading...
