VCAP:
VOFF:
This function applies to Dolby Digital, DTS stream sound.
senlng
item: DOWNMIX
MODE
setting contents: SURROUND/ STEREO
SURROUND: Surround compatible Downmix
STEREO: Stereo Downmix
Use the procedure described below to modify the output screen
according to the type
of
TV monitor (rear monitor) being used.
This setting can also be applied for the IVA-WS05.
If the rear monitor is not connected, the screen setting is 16:9.
setting item:
TV
SCREEN
senlng
contents: 4:3 LB / 4:3 PS
/16:9
• For some discs, the picture
may
not be set to the selected screen size.
(For details, refer to the explanation on the disc'sjacket.)
4:3 LETTER BOX:
Select this when connected to a conventional 4:3 size (normal
TV
aspect ratio) monitor. There may be black stripes visible at
the top and bottom of the screen (when playing a 16:9 size
movie). The width of these stripes will depend upon the original
aspect ratio of the theatrical release of the movie.
4:3 PAN-SCAN:
Select this when connected
to
a conventional 4:3 size monitor.
The picture will fill the entire
TV
screen. However, due
to
the
mismatch
in
aspect ratio, parts of the movie at the extreme left
and right sides will not be visible (when playing a 16:9 size
movie).
16:9 WIDE:
Select this when connected
to
a wide screen
TV.
This is the
factory setting.
Some DVD-Audio discs include bonus group.
The 4 digit code for the bonus group can be memorized.
Refer to the information on the jacket, etc.,
of
the disc, for the code
number.
Setting Item: BONUS CODE
Setting content:
CODE
1 Touch
[CODE].
The 10
key
input
screen is displayed.
2 Input the 4 digit code number given
on
the jacket of
the disc, etc.
3 Touch
[ENT]
to memorize the number.
•
If
the code number
of
the bonus group differs from the code number
you set in this section, the 10 key input screen automatically appears
in the display.
If
a new code number is input, this code number will
be replaced.
To
playback the DVD Audio Disc. you have a choice
of
3 different
settings.
If
the disc containing DVD Video and Audio, set VCAP (Video
Capable Audio Player)
or
VOFF (Video OFF) to playback the DVD
Audio.
setting Item: DVD-A SETUP
setting contents: VIDEO
I VCAP I VOFF
VIDEO: Only
DVD
Video is played back if the disc contains
DVD
Video and Audio.
DVD
Audio
is
played back with Video.
DVD
Audio is played back without Video.
When using discs containing both audio data and MP3IWMAJAAC
data.
Senlng Item: FILE PLAY
MODE
settmgcon~n~:CDICMPM
CD: Plays only the audio data on discs containing both
audio data and MP3/INMNAAC data.
CMPM: Plays only the MP3/INMNAAC files on discs containing
both audio data and MP3/INMNAAC data.
•
lnsen
the disc when playback is stopped
and
remove the disc from
the unit before setting.
• When an MP3-compatible CD changer is used, this setting cannot be
applied.
33-EN
VCAP:
VOFF:
This function applies to Dolby Digital, DTS stream sound.
senlng
item: DOWNMIX
MODE
setting contents: SURROUND/ STEREO
SURROUND: Surround compatible Downmix
STEREO: Stereo Downmix
Use the procedure described below to modify the output screen
according to the type
of
TV monitor (rear monitor) being used.
This setting can also be applied for the IVA-WS05.
If the rear monitor is not connected, the screen setting is 16:9.
setting item:
TV
SCREEN
senlng
contents: 4:3 LB / 4:3 PS
/16:9
• For some discs, the picture
may
not be set to the selected screen size.
(For details, refer to the explanation on the disc'sjacket.)
4:3 LETTER BOX:
Select this when connected to a conventional 4:3 size (normal
TV
aspect ratio) monitor. There may be black stripes visible at
the top and bottom of the screen (when playing a 16:9 size
movie). The width of these stripes will depend upon the original
aspect ratio of the theatrical release of the movie.
4:3 PAN-SCAN:
Select this when connected
to
a conventional 4:3 size monitor.
The picture will fill the entire
TV
screen. However, due
to
the
mismatch
in
aspect ratio, parts of the movie at the extreme left
and right sides will not be visible (when playing a 16:9 size
movie).
16:9 WIDE:
Select this when connected
to
a wide screen
TV.
This is the
factory setting.
Some DVD-Audio discs include bonus group.
The 4 digit code for the bonus group can be memorized.
Refer to the information on the jacket, etc.,
of
the disc, for the code
number.
Setting Item: BONUS CODE
Setting content:
CODE
1 Touch
[CODE].
The 10
key
input
screen is displayed.
2 Input the 4 digit code number given
on
the jacket of
the disc, etc.
3 Touch
[ENT]
to memorize the number.
•
If
the code number
of
the bonus group differs from the code number
you set in this section, the 10 key input screen automatically appears
in the display.
If
a new code number is input, this code number will
be replaced.
To
playback the DVD Audio Disc. you have a choice
of
3 different
settings.
If
the disc containing DVD Video and Audio, set VCAP (Video
Capable Audio Player)
or
VOFF (Video OFF) to playback the DVD
Audio.
setting Item: DVD-A SETUP
setting contents: VIDEO
I VCAP I VOFF
VIDEO: Only
DVD
Video is played back if the disc contains
DVD
Video and Audio.
DVD
Audio
is
played back with Video.
DVD
Audio is played back without Video.
When using discs containing both audio data and MP3IWMAJAAC
data.
Senlng Item: FILE PLAY
MODE
settmgcon~n~:CDICMPM
CD: Plays only the audio data on discs containing both
audio data and MP3/INMNAAC data.
CMPM: Plays only the MP3/INMNAAC files on discs containing
both audio data and MP3/INMNAAC data.
•
lnsen
the disc when playback is stopped
and
remove the disc from
the unit before setting.
• When an MP3-compatible CD changer is used, this setting cannot be
applied.
33-EN
To Next Page
Loading...
