Backlighting is provided by a fluorescent light built into the liquid
crystal panel. The illumination control adjusts the brightness
of
the
backlighting based on the car ambient lighting for easier viewing.
Setting Item: DIMMER
Setting contents: OFF/ ON/ AUTO
OFF: Deactivate Auto Dimmer mode
to
keep
the
background
illumination
of
the
monitor bright.
ON:
Keep
the
background illumination
of
the monitor dark.
AUTO:
Adjust the brightness
of
the
background illumination of
the
monitor automatically
to
the
brightness of
the
car
interior.
• When
ON
or
AUTO is set, the selling is also appliedfor the button
lighting
in
"Adjusting the Dimmer
of
Button Lighting
at
Night"
(page 37).
You
can adjust the brightness
of
the backlight (LOW). This function
could be used, for instance, to change the screen brightness while
traveling at night.
Setting Item: DIMMER LOW LEVEL
Setting content:
·15
to
+15
You
can adjust the level between MIN (-15)
and
MAX (+15).
When it reaches the minimum or maximum point, the display
shows "MIN" or "MAX" respectively.
You
have a choice
of
background textures you can set.
Setting item: BACKGROUND
Setting contents:
MODEl
/ MODE2 / MODE3'
* MODE3 is the black screen background supplied on this unit and
can't be replaced by "Downloading the BACKGROUND data
".
• This operation can be carried out after removing the disc from the
unit
or
when playback
of
the disc has stopped.
• Wallpapers downloadedfrom "Downloading the BACKGROUND
data" (page 41) are recalled.
• When you select a source other than the built-in disc on this unit, and
the built-in disc is selected on the rear monitor connected to the unit,
background textures cannot be displayed on the unit.
• When an error message is displayed (ERROR. etc.), background
textures selected by this selling cannot be displayed on the unit.
The background texture will automatically change each time the
ignition key is turned off and turned back on again.
Setting Item: AUTO BACKGROUND
Settmgcon~nm:OFF/ON
OFF:
Turn
off
the
Auto Background
Texture
Scroll mode.
ON:
Turn
on
the
Auto Background
Texture
Scroll mode.
The
background textures will scroll
when
the
ignition key
is
turned off once and turned back
on
again
as
follows:
MODE1
~
MODE2
~
MODE3
~
MODE1
• Wallpapers downloadedfrom "Downloading the BACKGROUND
data" (page 41) are recalled.
You
can choose from 4 different display colors for the font back (source
title, shortcut display, etc.).
Setting Item: BASE COLOR
Setting contents: BLUE/ RED / GREEN / AMBER
Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
Setting Item: SCREEN ALIGNMENT
Setting contents:
~
/ RESET
1 Touch
[»
I of SCREEN ALIGNMENT.
The adjustment screen appears.
2 Accurately touch the
lZJ
mark provided in the lower left
corner of the screen.
The screen changes to the adjustment screen.
3 Accurately touch the
lZJ
mark provided in the
upper
right
corner of the screen.
This completes adjustment, and returns to the DISPLAY
setup
mode
screen.
•
If
you have touched a location other than the
lZJ
mark, touch
[RESET]
to restore the adjustment screen to the initial selling.
•
If
you touch
[~]
on
the adjustment screen, no adjustment is done
and the DISPLAY setup screen is restored.
35-EN
Backlighting is provided by a fluorescent light built into the liquid
crystal panel. The illumination control adjusts the brightness
of
the
backlighting based on the car ambient lighting for easier viewing.
Setting Item: DIMMER
Setting contents: OFF/ ON/ AUTO
OFF: Deactivate Auto Dimmer mode
to
keep
the
background
illumination
of
the
monitor bright.
ON:
Keep
the
background illumination
of
the monitor dark.
AUTO:
Adjust the brightness
of
the
background illumination of
the
monitor automatically
to
the
brightness of
the
car
interior.
• When
ON
or
AUTO is set, the selling is also appliedfor the button
lighting
in
"Adjusting the Dimmer
of
Button Lighting
at
Night"
(page 37).
You
can adjust the brightness
of
the backlight (LOW). This function
could be used, for instance, to change the screen brightness while
traveling at night.
Setting Item: DIMMER LOW LEVEL
Setting content:
·15
to
+15
You
can adjust the level between MIN (-15)
and
MAX (+15).
When it reaches the minimum or maximum point, the display
shows "MIN" or "MAX" respectively.
You
have a choice
of
background textures you can set.
Setting item: BACKGROUND
Setting contents:
MODEl
/ MODE2 / MODE3'
* MODE3 is the black screen background supplied on this unit and
can't be replaced by "Downloading the BACKGROUND data
".
• This operation can be carried out after removing the disc from the
unit
or
when playback
of
the disc has stopped.
• Wallpapers downloadedfrom "Downloading the BACKGROUND
data" (page 41) are recalled.
• When you select a source other than the built-in disc on this unit, and
the built-in disc is selected on the rear monitor connected to the unit,
background textures cannot be displayed on the unit.
• When an error message is displayed (ERROR. etc.), background
textures selected by this selling cannot be displayed on the unit.
The background texture will automatically change each time the
ignition key is turned off and turned back on again.
Setting Item: AUTO BACKGROUND
Settmgcon~nm:OFF/ON
OFF:
Turn
off
the
Auto Background
Texture
Scroll mode.
ON:
Turn
on
the
Auto Background
Texture
Scroll mode.
The
background textures will scroll
when
the
ignition key
is
turned off once and turned back
on
again
as
follows:
MODE1
~
MODE2
~
MODE3
~
MODE1
• Wallpapers downloadedfrom "Downloading the BACKGROUND
data" (page 41) are recalled.
You
can choose from 4 different display colors for the font back (source
title, shortcut display, etc.).
Setting Item: BASE COLOR
Setting contents: BLUE/ RED / GREEN / AMBER
Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
Setting Item: SCREEN ALIGNMENT
Setting contents:
~
/ RESET
1 Touch
[»
I of SCREEN ALIGNMENT.
The adjustment screen appears.
2 Accurately touch the
lZJ
mark provided in the lower left
corner of the screen.
The screen changes to the adjustment screen.
3 Accurately touch the
lZJ
mark provided in the
upper
right
corner of the screen.
This completes adjustment, and returns to the DISPLAY
setup
mode
screen.
•
If
you have touched a location other than the
lZJ
mark, touch
[RESET]
to restore the adjustment screen to the initial selling.
•
If
you touch
[~]
on
the adjustment screen, no adjustment is done
and the DISPLAY setup screen is restored.
35-EN
To Next Page
Loading...
