Scroll display
is
available
if
CD
text, folder name, file name
or
tag
information
is
entered.
setting
Item: AUTO SCROLL
settmgcon~nB:OFF/ON
OFF:
Turns
off the AUTO scroll mode. Scroll display is done
once
as
a track
is
changed.
ON: Turns on the AUTO scroll mode. Scroll display is
repeated as long as the mode
is
turned
on.
" The display scrolls on the unit when the screen is filled
up.
" Song. artist and album name. etc. scrolls when an iPod is connected.
" Short/Long Station name. Song. Artist. and album name scrolling are
displayed in HD Radio mode.
You
can adjust the brightness
of
the button lighting at night with the
dimmer.
setting
Item: LED DIMMER LEVEL
setting
level:
-2
to
+2
System
Setup
Operation
To
display the System mode screen:
To
watch a video source. your vehicle must be parked with the
ignition key
in
the ACC or
ON
position.
To
do
this. follow the
procedure below.
Bring your vehicle
to
a
complete
stop
at a safe
location.
Engage
the parking brake.
2
Keep
pushing
the foot brake
and
release the parking
brake
once
then
engage
it again.
3 When the
parking
brake
is
engaged
for the
second
time. release the foot brake.
" For automatic transmission vehicles. place the transmission lever
in the Park position.
Now.
the locking system for the System mode operation has been
released. Engaging the parking brake can reactivate the System
mode. as long as the car's ignition has not been turned off. It is
not necessary
to
repeat the above procedure
(1
through 3) of
"To
display the System mode screen."
Each time the ignition
is
turned
OFF.
perform the procedure of
"To
display the System mode screen."
The following steps 1 to 4 are common operations to each
"Setting item" ofSYSTEM Setup. Refer to each section for
details.
1 Touch
[SETUP]
on the main source screen.
The SETUP selection screen is
displayed.
2 Touch
[SYSTEM
SETUP].
The SYSTEM SETUP screen
appears.
3 Touch [
....
]
or
[.]
etc.,
of
the desired item
to
change
its setting.
Setting Items:
IN
INT.
MUTE"/ /
IN
INT.
ICON /
REMOTE
SENSOR"2
/ CAMERA
IN
/
NAV.
IN
/
NAV.
MIX"] /
AUX
IN
/
AUX
IN
LEVEL"4
/ AUX
IN
SIGNAL"4 / AUX OUT / BLUETOOTH
IN
/
USB
ADAPTER
/
VISUAL KEy"5 /
OPTION
KEY
/ OPTICAL OUT / AUX+
IN
/
AUX+
LEVEL"6
"/ Displayed only when BLUETOOTH
IN
is
OFF.
"2 When
ON
is set in "Setting the Picture Output" (page 39). the item is
displayed.
"] When
ON
is set in "Setting the Navigation Mode" (page 38). the item
is
displayed.
"4
Not displayed when OFF is set in "Setting the AUX Mode"
(page 38).
"5
Not displayed when OFF is set in "Setting the Navigation Mode"
(page 38).
"6
Not displayed when
OFF
is set in "Setting the
AUX
+ Mode"
(page 39).
4 Touch
[~]
to
return
to
the previous screen.
Touch
and
hold
[~l
for at least 2
seconds
to
return to
the
main source screen that
was
displayed
before the
setup
operation was started.
" Immediately after changing the settings
of
System Mode (while the
system is writing data automatically) do not turn the ignition key
(engine key) to
OFF.
Otherwise. the settings may not be changed.
37-EN
Scroll display
is
available
if
CD
text, folder name, file name
or
tag
information
is
entered.
setting
Item: AUTO SCROLL
settmgcon~nB:OFF/ON
OFF:
Turns
off the AUTO scroll mode. Scroll display is done
once
as
a track
is
changed.
ON: Turns on the AUTO scroll mode. Scroll display is
repeated as long as the mode
is
turned
on.
" The display scrolls on the unit when the screen is filled
up.
" Song. artist and album name. etc. scrolls when an iPod is connected.
" Short/Long Station name. Song. Artist. and album name scrolling are
displayed in HD Radio mode.
You
can adjust the brightness
of
the button lighting at night with the
dimmer.
setting
Item: LED DIMMER LEVEL
setting
level:
-2
to
+2
System
Setup
Operation
To
display the System mode screen:
To
watch a video source. your vehicle must be parked with the
ignition key
in
the ACC or
ON
position.
To
do
this. follow the
procedure below.
Bring your vehicle
to
a
complete
stop
at a safe
location.
Engage
the parking brake.
2
Keep
pushing
the foot brake
and
release the parking
brake
once
then
engage
it again.
3 When the
parking
brake
is
engaged
for the
second
time. release the foot brake.
" For automatic transmission vehicles. place the transmission lever
in the Park position.
Now.
the locking system for the System mode operation has been
released. Engaging the parking brake can reactivate the System
mode. as long as the car's ignition has not been turned off. It is
not necessary
to
repeat the above procedure
(1
through 3) of
"To
display the System mode screen."
Each time the ignition
is
turned
OFF.
perform the procedure of
"To
display the System mode screen."
The following steps 1 to 4 are common operations to each
"Setting item" ofSYSTEM Setup. Refer to each section for
details.
1 Touch
[SETUP]
on the main source screen.
The SETUP selection screen is
displayed.
2 Touch
[SYSTEM
SETUP].
The SYSTEM SETUP screen
appears.
3 Touch [
....
]
or
[.]
etc.,
of
the desired item
to
change
its setting.
Setting Items:
IN
INT.
MUTE"/ /
IN
INT.
ICON /
REMOTE
SENSOR"2
/ CAMERA
IN
/
NAV.
IN
/
NAV.
MIX"] /
AUX
IN
/
AUX
IN
LEVEL"4
/ AUX
IN
SIGNAL"4 / AUX OUT / BLUETOOTH
IN
/
USB
ADAPTER
/
VISUAL KEy"5 /
OPTION
KEY
/ OPTICAL OUT / AUX+
IN
/
AUX+
LEVEL"6
"/ Displayed only when BLUETOOTH
IN
is
OFF.
"2 When
ON
is set in "Setting the Picture Output" (page 39). the item is
displayed.
"] When
ON
is set in "Setting the Navigation Mode" (page 38). the item
is
displayed.
"4
Not displayed when OFF is set in "Setting the AUX Mode"
(page 38).
"5
Not displayed when OFF is set in "Setting the Navigation Mode"
(page 38).
"6
Not displayed when
OFF
is set in "Setting the
AUX
+ Mode"
(page 39).
4 Touch
[~]
to
return
to
the previous screen.
Touch
and
hold
[~l
for at least 2
seconds
to
return to
the
main source screen that
was
displayed
before the
setup
operation was started.
" Immediately after changing the settings
of
System Mode (while the
system is writing data automatically) do not turn the ignition key
(engine key) to
OFF.
Otherwise. the settings may not be changed.
37-EN
To Next Page
Loading...
