If
an
Alpine
Ai-NET
Auxiliary Input Adapter (KCA-8OI B) is
connected to
the
IVA-W505,
an
Auxiliary Source
will
be allowed to
interrupt
the
current audio
source.
For example, you
can
listen to a
portable MP3 player through your
car
audio system
even
with a CO
changer connected
and
playing. The
CD
changer
will
automatically
mute
when
switched to
the
AUX
Input. For further details
on
how to
use
the
Alpine KCA-801 B,
see
your authorized Alpine dealer.
setting
Item: IN
INT.
MUTE
setting
contents: OFF/ ON
OFF: The volume level can be adjusted
in
Interrupt mode.
ON: Sound will not be output. The icon that is set in "Setting
the Interrupt Icon Display" is displayed.
• The auxiliary device being connected must have an Interrupt wire
with a negative trigger
for
this function to operate automatically.
Otherwise. a separate switch needs to be added to switch
it
manually.
The unit
can
display the icon
of
an
external device,
such
as
a telephone,
whenever a phone call
comes
in to tell you there is a phone call.
setting
Item: IN
INT.
ICON
Setting contents: INT/
TEL
INT: The INT icon appears on the display.
TEL: When the external device (telephone) sends the interrupt
signal. the telephone icon appears on the display.
For remote control operation,
the
remote
sensor
of
the
external device
(monitor, etc.)
can
be switched,
as
you prefer.
setting
Item: REMOTE SENSOR
Settmgcon~nB:FRONT/REAR
FRONT: The remote
sensor
of this unit is effective.
REAR:
The
remote sensor
of
the
external
monitor
connected
to
AUX
OUT
of
this
unil
becomes
effective.
The
remote control
operales
the
source
connected
to
the
AUX OUT terminals.
• The touch panel rear monitor sensor has priority over the remote
control sensor.
If
the rear monitor (connected to the Alpine rear
monitor output via the Monitor control lead) is touched. the
command is executed regardless
of
the remote control sensor switch
setting. Note. however, that the remote control sensor that has been
set takes priority
if
it has been 5 seconds since last touching the
panel.
• When an optional DVD changer
or
DVD playeris connected. and the
remote control sensor is set to REAR. some soft button operations
(
[.
JSTOP, etc.) cannot be peiformed.
In
this case. set the remote
control sensor to FRONT.
38-EN
With a rear camera connected, rear view video is output
to
the
monitor.
Setting Item: CAMERA IN
Settmgcon~nB:OFF/ON
OFF: The CAMERA source is not displayed on the VISUAL
selection screen.
ON: Even
if
the shift lever is not set to reverse
(R).
the rear
pictures are output by selecting the CAMERA source.
• By shifting to reverse (R). the rear pictures are output.
Thisfunction is effective when the reverse wire is properly connected.
•
To
apply the setting. set to VISUAL "Setting the VISUAL Soft Button"
(page 39).
When you connect
an
optional navigation equipment,
set
it
to ON.
Setting Item:
NAV.
IN
Settmgcon~nB:OFF/ON
OFF: Navigation source is not displayed. The settings related
to the navigation can not be changed from this unit.
ON: Navigation source is displayed.
With
an
Alpine navigation system connected to
the
IVA-W505, the
voice guidance
of
the
navigation system
will
be mixed with
the
radio
or
COplay.
Setting item:
NAV.
MIX
setting
contents:
OFF/ON
OFF: The navigation interruption mode is turned off.
ON: The navigation interruption mode is
on.
See
"Adjusting
NAV.
MIX Level"
under
"Adjusting
the
Audio"
on
page
26
to
set
the
navigation interruption
volume
level.
• The volume level
for
voice prompts during navigation guidance is set
by adjusting the volume while the prompts are announced. When the
announcementfinishes. the normal audio volume and the previous
audio screen are restored. The voice prompt volume is always at
or
below the current listening volume.
If
a navigation announcement
cuts in while adjusting the audio level. it always resets to the current
level regardless
of
the audio level setting.
• This setting is effective when
NAY.
IN
of
SYSTEM list screen is ON.
Setting item: AUXIN
Setting contents: OFF/ ON /
OVO
/ GAME /
TV
/
EXT.
OVO
/
NA
V.
OFF:
AUX
source is not displayed.
ON:
AUX
source is displayed.
•
OFF
is notdisplayed when the optional DVD player
or
DVD changer
is connected. During SYSTEM setup. although the
AUX
name can be
changed.
it is not displayed on the source selection screen.
• When
OFF
is selected. the settings related to
AUX
cannot be changed
from this unit.
• The selected source name is displayed instead
of
AUX
source name.
Select SOURCE to switch to the guide function
of
each mode.
• Only when an Alpine TV tuner is connected. you can operate the
displayedfunction guide from this unit.
If
an
Alpine
Ai-NET
Auxiliary Input Adapter (KCA-8OI B) is
connected to
the
IVA-W505,
an
Auxiliary Source
will
be allowed to
interrupt
the
current audio
source.
For example, you
can
listen to a
portable MP3 player through your
car
audio system
even
with a CO
changer connected
and
playing. The
CD
changer
will
automatically
mute
when
switched to
the
AUX
Input. For further details
on
how to
use
the
Alpine KCA-801 B,
see
your authorized Alpine dealer.
setting
Item: IN
INT.
MUTE
setting
contents: OFF/ ON
OFF: The volume level can be adjusted
in
Interrupt mode.
ON: Sound will not be output. The icon that is set in "Setting
the Interrupt Icon Display" is displayed.
• The auxiliary device being connected must have an Interrupt wire
with a negative trigger
for
this function to operate automatically.
Otherwise. a separate switch needs to be added to switch
it
manually.
The unit
can
display the icon
of
an
external device,
such
as
a telephone,
whenever a phone call
comes
in to tell you there is a phone call.
setting
Item: IN
INT.
ICON
Setting contents: INT/
TEL
INT: The INT icon appears on the display.
TEL: When the external device (telephone) sends the interrupt
signal. the telephone icon appears on the display.
For remote control operation,
the
remote
sensor
of
the
external device
(monitor, etc.)
can
be switched,
as
you prefer.
setting
Item: REMOTE SENSOR
Settmgcon~nB:FRONT/REAR
FRONT: The remote
sensor
of this unit is effective.
REAR:
The
remote sensor
of
the
external
monitor
connected
to
AUX
OUT
of
this
unil
becomes
effective.
The
remote control
operales
the
source
connected
to
the
AUX OUT terminals.
• The touch panel rear monitor sensor has priority over the remote
control sensor.
If
the rear monitor (connected to the Alpine rear
monitor output via the Monitor control lead) is touched. the
command is executed regardless
of
the remote control sensor switch
setting. Note. however, that the remote control sensor that has been
set takes priority
if
it has been 5 seconds since last touching the
panel.
• When an optional DVD changer
or
DVD playeris connected. and the
remote control sensor is set to REAR. some soft button operations
(
[.
JSTOP, etc.) cannot be peiformed.
In
this case. set the remote
control sensor to FRONT.
38-EN
With a rear camera connected, rear view video is output
to
the
monitor.
Setting Item: CAMERA IN
Settmgcon~nB:OFF/ON
OFF: The CAMERA source is not displayed on the VISUAL
selection screen.
ON: Even
if
the shift lever is not set to reverse
(R).
the rear
pictures are output by selecting the CAMERA source.
• By shifting to reverse (R). the rear pictures are output.
Thisfunction is effective when the reverse wire is properly connected.
•
To
apply the setting. set to VISUAL "Setting the VISUAL Soft Button"
(page 39).
When you connect
an
optional navigation equipment,
set
it
to ON.
Setting Item:
NAV.
IN
Settmgcon~nB:OFF/ON
OFF: Navigation source is not displayed. The settings related
to the navigation can not be changed from this unit.
ON: Navigation source is displayed.
With
an
Alpine navigation system connected to
the
IVA-W505, the
voice guidance
of
the
navigation system
will
be mixed with
the
radio
or
COplay.
Setting item:
NAV.
MIX
setting
contents:
OFF/ON
OFF: The navigation interruption mode is turned off.
ON: The navigation interruption mode is
on.
See
"Adjusting
NAV.
MIX Level"
under
"Adjusting
the
Audio"
on
page
26
to
set
the
navigation interruption
volume
level.
• The volume level
for
voice prompts during navigation guidance is set
by adjusting the volume while the prompts are announced. When the
announcementfinishes. the normal audio volume and the previous
audio screen are restored. The voice prompt volume is always at
or
below the current listening volume.
If
a navigation announcement
cuts in while adjusting the audio level. it always resets to the current
level regardless
of
the audio level setting.
• This setting is effective when
NAY.
IN
of
SYSTEM list screen is ON.
Setting item: AUXIN
Setting contents: OFF/ ON /
OVO
/ GAME /
TV
/
EXT.
OVO
/
NA
V.
OFF:
AUX
source is not displayed.
ON:
AUX
source is displayed.
•
OFF
is notdisplayed when the optional DVD player
or
DVD changer
is connected. During SYSTEM setup. although the
AUX
name can be
changed.
it is not displayed on the source selection screen.
• When
OFF
is selected. the settings related to
AUX
cannot be changed
from this unit.
• The selected source name is displayed instead
of
AUX
source name.
Select SOURCE to switch to the guide function
of
each mode.
• Only when an Alpine TV tuner is connected. you can operate the
displayedfunction guide from this unit.
To Next Page
Loading...
