Adjustment procedure
Make the adjustments described below in order to reproduce Dolby
Digital and DTS sound with greater accuracy.
Adjustment
Procedure
for
Dolby
Surround
1
2
3
4
5
6
7
Speaker Setup (page 49)
(Turning the speakers to
be
used on
and
off and
setting their response)
•
Adjusting the speaker levels (page 49)
(Adjusting the signal output level to the various
speakers)
•
Mixing bass sound to the rear channel
(page 48)
(Achieving smooth sound
in
the rear seat
by
mixing
the front audio signals with the rear speaker signals)
•
Adjusting the acoustic image (page 48)
(Adjusting the acoustic image to achieve a sound as
if the center speaker were directly
in
front of the
listener)
•
Achieving powerful high volume sound
(page 49)
(Achieving energetic sound with even greater power,
like the sound
in
a movie theater)
•
Adjusting the DVD Level (page 49)
(Adjust the volume (signal level)
in
the Dolby Digital,
Pro Logic
II,
DTS
and
PCM modes)
•
Storing Settings in the Memory (page 50)
(Storing all the settings
and
adjustments
made
on the
IVA-W505 (not only the above settings/adjusts) in the
memory)
Setting
the
A.
PROCESSOR
1 Check that Defeat mode is off (page 26).
2 Touch
[SETUP]
on the main source screen.
The SETUP selection screen is displayed.
3 Touch
[AUDIO
SETUP].
The AUDIO SETUP screen appears.
4 Touch
[»
] of A.PROCESSOR.
The A.PROCESSOR list screen appears.
5 Touch [
...
] ,
[~]
or
[»]
etc., of the desired Item to
change its setting.
Setting Items:
MEDIA XPANDER I BASS SOUND
CONT.I
DOLBY PL/IIREAR
FILL I X-OVER I T.CORR I PHASEI G-EQ I P-EQ I SPEAKER
SELECT
I MULTI
CH
SETUPI SPEAKER SETUPI DVD LEVEL I
PCMMODE
• Touching [ESC] will change to the main source screen.
• Touching
[~]
to return to the previous screen.
Before performing the operations below, set MX (Media Xpander)
mode
of
the PXA-H700 to "AUTO" when the PXA-H700 is connected.
Setting item: MEDIA XPANDER
1 Select ON
or
OFF
of
MX by touching [... ] or
[~]
of
MEDIA XPANDER.
OFF:
Turns
off
the
MX
effect of every music source.
ON:
Turns
on
the
specified
MX
mode.
2 Touch
[»]
after setting to ON.
The MEDIA XPANDER setup screen appears.
3 Touch [
...
]
or
[~]
of
the desired MX mode.
• Music source (such
as
radio broadcasts
and
CDs, excluding
AM
radio) level can be set.
MX
CD (OFF,
CD
MX
1 to
3)
CD
mode processes a large quantity of data. This data is used
to
reproduce
the
sound cleanly by making use of
the
data
quantity.
MX
CMPM
(OFF, CMPM
MX
1 to 3)I
MX
SAT(OFF, SAT
MX
1 to
3)
This corrects information that was omitted
at
the
time of
compression.
This
reproduces a well-balanced sound close
to
the
original.
MX
FM
(OFF,
FM
MX
1 to
3)
The
medium
to
high frequencies become more clear, and
produces well balanced sound
in
all
the
bands.
In case
of
combining the Automatic adjustments etc.
We
recommend to make the Automatic adjustments before the Dolby
Surround adjustments.
44-EN
Adjustment procedure
Make the adjustments described below in order to reproduce Dolby
Digital and DTS sound with greater accuracy.
Adjustment
Procedure
for
Dolby
Surround
1
2
3
4
5
6
7
Speaker Setup (page 49)
(Turning the speakers to
be
used on
and
off and
setting their response)
•
Adjusting the speaker levels (page 49)
(Adjusting the signal output level to the various
speakers)
•
Mixing bass sound to the rear channel
(page 48)
(Achieving smooth sound
in
the rear seat
by
mixing
the front audio signals with the rear speaker signals)
•
Adjusting the acoustic image (page 48)
(Adjusting the acoustic image to achieve a sound as
if the center speaker were directly
in
front of the
listener)
•
Achieving powerful high volume sound
(page 49)
(Achieving energetic sound with even greater power,
like the sound
in
a movie theater)
•
Adjusting the DVD Level (page 49)
(Adjust the volume (signal level)
in
the Dolby Digital,
Pro Logic
II,
DTS
and
PCM modes)
•
Storing Settings in the Memory (page 50)
(Storing all the settings
and
adjustments
made
on the
IVA-W505 (not only the above settings/adjusts) in the
memory)
Setting
the
A.
PROCESSOR
1 Check that Defeat mode is off (page 26).
2 Touch
[SETUP]
on the main source screen.
The SETUP selection screen is displayed.
3 Touch
[AUDIO
SETUP].
The AUDIO SETUP screen appears.
4 Touch
[»
] of A.PROCESSOR.
The A.PROCESSOR list screen appears.
5 Touch [
...
] ,
[~]
or
[»]
etc., of the desired Item to
change its setting.
Setting Items:
MEDIA XPANDER I BASS SOUND
CONT.I
DOLBY PL/IIREAR
FILL I X-OVER I T.CORR I PHASEI G-EQ I P-EQ I SPEAKER
SELECT
I MULTI
CH
SETUPI SPEAKER SETUPI DVD LEVEL I
PCMMODE
• Touching [ESC] will change to the main source screen.
• Touching
[~]
to return to the previous screen.
Before performing the operations below, set MX (Media Xpander)
mode
of
the PXA-H700 to "AUTO" when the PXA-H700 is connected.
Setting item: MEDIA XPANDER
1 Select ON
or
OFF
of
MX by touching [... ] or
[~]
of
MEDIA XPANDER.
OFF:
Turns
off
the
MX
effect of every music source.
ON:
Turns
on
the
specified
MX
mode.
2 Touch
[»]
after setting to ON.
The MEDIA XPANDER setup screen appears.
3 Touch [
...
]
or
[~]
of
the desired MX mode.
• Music source (such
as
radio broadcasts
and
CDs, excluding
AM
radio) level can be set.
MX
CD (OFF,
CD
MX
1 to
3)
CD
mode processes a large quantity of data. This data is used
to
reproduce
the
sound cleanly by making use of
the
data
quantity.
MX
CMPM
(OFF, CMPM
MX
1 to 3)I
MX
SAT(OFF, SAT
MX
1 to
3)
This corrects information that was omitted
at
the
time of
compression.
This
reproduces a well-balanced sound close
to
the
original.
MX
FM
(OFF,
FM
MX
1 to
3)
The
medium
to
high frequencies become more clear, and
produces well balanced sound
in
all
the
bands.
In case
of
combining the Automatic adjustments etc.
We
recommend to make the Automatic adjustments before the Dolby
Surround adjustments.
44-EN
To Next Page
Loading...
