MX
DVD
(OFF,
MOVIE
MX
1
to
2)
The
dialog portion of
the
video
is
reproduced more clearly.
(DVDMUSIC)
This disc contains a large quantity of data such
as
music clip.
MX
uses this data
to
reproduce the sound accurately.
MX AUX (OFF, CMPM MX, MOVIE MX, MUSIC MX)
Choose
the
MX
mode (CMPM. MUSIC, or MOVIE) that
corresponds
to
the
media connected.
• The contents
of
MX set here is reflected to PXA-H700
or
PXA-H70I.
• When
OFF
is selected.
MX
effect
of
each MX mode will be
OFF.
• Each music source. such as radio, CD and MP3 can have its own
MX
setting.
• MX mode does not function when
MX
is
ON
for
AM
radio.
•
MX
CMPM is applied
for
MP3IWMAJAAC
and
iPod.
• MX SAT
is
applied
for
XM.
SIRIUS and HD Radio.
• The
MX
setting can be performed only when a source is currently
selected.
Betting
item:
BASS
SOUND CONT.
Setting Bass Compressor
You
can adjust the sound
of
low frequencies as desired.
Touch [
....
]
or
[.-
]
of
BASS
COMPo
to
select the desired
mode.
Bass sound is
emphasized
more as the
mode
is
sequentially switched as MODE 1
~
2
~
3, offering you
vivid low frequencies.
Select OFF when the setting is not necessary.
Setting Bass Focus
Using the previously specified delay number (time difference) allows
you to set a time difference between the front-rearneft-right speakers.
Namely,
it
enables a time correction based on your preference. With an
initial delay
of
0.05 ms for each
of
the ato 400 steps, audible time
correction can be achieved.
Set the delay number in the
front
and rear, and
on
the
right and left
of
the desired speaker
by
touching the
respective [
....
]
or
[.-
] button.
•
Any
setting in Bass Focus is applied in time correction. too (page 46).
Pro Logic processing can be conducted on the music signals recorded
on two channels to achieve Dolby Pro Logic
II
surround sound. For
two-channel Dolby Digital and DTS signals, there is also a "REAR
FILL" function for outputting the signals
of
the front channel to the rear
channel.
Setting
item:
DOLBY
PLIVREAR FILL
Touch [
...
]
or
[.-]
of
DOLBY PLIIIREAR
to
select the
desired mode.
PL
II
MOVIE: Suits
the
stereo
TV
shows and
all
programs
encoded
in
Dolby Surround. It improves
the
sound field directivity
to
near that of discrete
5.1-channel sound.
PL
II
MUSIC: Can be used for all stereo music recordings, and
provides a wide, deep sound field.
OFF:
Turns
DOLBY
PL
II
function
to
OFF.
If
PL II MUSIC
is
selected, the
center
wldth
can
be
adjusted
with
followIng
operatlons.
This function offers
the
optimum vocal position by adjusting
the
center channel position between the center speaker and
the
LJR
speaker. (The adjustments established
in
"Adjusting
the
acoustic image (BI-PHANTOM)" (page 48)
are
ineffective while
this function
is
activated.)
Touch [
....
) or
[.-)
of
CENTER WIDTH CONT. to adjust the
level.
The level
can
be
adjusted between 0 to +
7.
When the
level increases, the center channel position moves from
the center speaker position to both sides.
Touch [OFF]
of
CENTER WIDTH CONT. to turn off the
center width control.
• This adjustment is effective when the setting
of
the center speaker is
SMALL or LARGE in the speaker setup settings (page 49).
• "REAR FILL" function:
Depending on the input signals, the sound may only be outputfrom
thefront speakers.
In
this case. the "REAR FILL" function can be
used to output signalsfrom the rear speakers as well.
• Avoid stopping, pausing, switching the disc, cueing,fast-forwarding
or switching the audio channel
of
this unit while making this
adjustment. The setting is canceled
if
the Decode mode is switched.
• This adjustment is ineffective when the speaker is set CENTER
to
OFF in "Setting the Speakers" (page 48).
• This function only works with two-channel signals. This operation is
ineffective when
5.
I-channel DTS
or
Dolby Digital signals are input.
•
If
the setting
of
REAR FILL is made when REAR MIX is ON. sound is
unchanged in the rearfill setting because REAR MIX is given priority
during 2 channel decoder other than linear PCM.
•
For
linear PCM signals, the voice is output from the rear speaker
regardless
of
the REAR FILL and REAR MIX setting.
45-EN
MX
DVD
(OFF,
MOVIE
MX
1
to
2)
The
dialog portion of
the
video
is
reproduced more clearly.
(DVDMUSIC)
This disc contains a large quantity of data such
as
music clip.
MX
uses this data
to
reproduce the sound accurately.
MX AUX (OFF, CMPM MX, MOVIE MX, MUSIC MX)
Choose
the
MX
mode (CMPM. MUSIC, or MOVIE) that
corresponds
to
the
media connected.
• The contents
of
MX set here is reflected to PXA-H700
or
PXA-H70I.
• When
OFF
is selected.
MX
effect
of
each MX mode will be
OFF.
• Each music source. such as radio, CD and MP3 can have its own
MX
setting.
• MX mode does not function when
MX
is
ON
for
AM
radio.
•
MX
CMPM is applied
for
MP3IWMAJAAC
and
iPod.
• MX SAT
is
applied
for
XM.
SIRIUS and HD Radio.
• The
MX
setting can be performed only when a source is currently
selected.
Betting
item:
BASS
SOUND CONT.
Setting Bass Compressor
You
can adjust the sound
of
low frequencies as desired.
Touch [
....
]
or
[.-
]
of
BASS
COMPo
to
select the desired
mode.
Bass sound is
emphasized
more as the
mode
is
sequentially switched as MODE 1
~
2
~
3, offering you
vivid low frequencies.
Select OFF when the setting is not necessary.
Setting Bass Focus
Using the previously specified delay number (time difference) allows
you to set a time difference between the front-rearneft-right speakers.
Namely,
it
enables a time correction based on your preference. With an
initial delay
of
0.05 ms for each
of
the ato 400 steps, audible time
correction can be achieved.
Set the delay number in the
front
and rear, and
on
the
right and left
of
the desired speaker
by
touching the
respective [
....
]
or
[.-
] button.
•
Any
setting in Bass Focus is applied in time correction. too (page 46).
Pro Logic processing can be conducted on the music signals recorded
on two channels to achieve Dolby Pro Logic
II
surround sound. For
two-channel Dolby Digital and DTS signals, there is also a "REAR
FILL" function for outputting the signals
of
the front channel to the rear
channel.
Setting
item:
DOLBY
PLIVREAR FILL
Touch [
...
]
or
[.-]
of
DOLBY PLIIIREAR
to
select the
desired mode.
PL
II
MOVIE: Suits
the
stereo
TV
shows and
all
programs
encoded
in
Dolby Surround. It improves
the
sound field directivity
to
near that of discrete
5.1-channel sound.
PL
II
MUSIC: Can be used for all stereo music recordings, and
provides a wide, deep sound field.
OFF:
Turns
DOLBY
PL
II
function
to
OFF.
If
PL II MUSIC
is
selected, the
center
wldth
can
be
adjusted
with
followIng
operatlons.
This function offers
the
optimum vocal position by adjusting
the
center channel position between the center speaker and
the
LJR
speaker. (The adjustments established
in
"Adjusting
the
acoustic image (BI-PHANTOM)" (page 48)
are
ineffective while
this function
is
activated.)
Touch [
....
) or
[.-)
of
CENTER WIDTH CONT. to adjust the
level.
The level
can
be
adjusted between 0 to +
7.
When the
level increases, the center channel position moves from
the center speaker position to both sides.
Touch [OFF]
of
CENTER WIDTH CONT. to turn off the
center width control.
• This adjustment is effective when the setting
of
the center speaker is
SMALL or LARGE in the speaker setup settings (page 49).
• "REAR FILL" function:
Depending on the input signals, the sound may only be outputfrom
thefront speakers.
In
this case. the "REAR FILL" function can be
used to output signalsfrom the rear speakers as well.
• Avoid stopping, pausing, switching the disc, cueing,fast-forwarding
or switching the audio channel
of
this unit while making this
adjustment. The setting is canceled
if
the Decode mode is switched.
• This adjustment is ineffective when the speaker is set CENTER
to
OFF in "Setting the Speakers" (page 48).
• This function only works with two-channel signals. This operation is
ineffective when
5.
I-channel DTS
or
Dolby Digital signals are input.
•
If
the setting
of
REAR FILL is made when REAR MIX is ON. sound is
unchanged in the rearfill setting because REAR MIX is given priority
during 2 channel decoder other than linear PCM.
•
For
linear PCM signals, the voice is output from the rear speaker
regardless
of
the REAR FILL and REAR MIX setting.
45-EN
To Next Page
Loading...
