Checking
the
SAT
Radio
ID
Number
A unique Radio [D number is required to subscribe to SAT Radio
programming. Each third party
XM
or SIRIUS radio comes with this
number.
XMRadlo:
This number is an 8 character alphanumeric number. It is printed on a
[abel found on the SAT Receiver.
SIRIUS
Radio:
This number
is
a
12
digits number. It is printed on a label found on the
SAT Receiver.
It can also be displayed on the screen
of
the IVA-W505 in the following
way.
1 While receiving SAT Radio, touch NO. (
..
]
or
(~
] to
select channel '0' for
XM
and channel "255" for
SIRIUS.
The
unit displays the
ID
number.
2
To
cancel the
10
number display, change the
channel.
•
You
cannot use
"0",
"S
..
,
..
["
or
"F"for
the ID Number. (XM radio
Receiver only)
•
You
can check the ID numberprinted on a label on your third party,
SAT
Radio Receiver package.
Storing
Channel
Presets
1 Touch
(P1/3]
after selecting a desired band.
The Function Guide is switched.
2 Touch and hold
anyone
of the preset buttons
(P.SET
1]
through
(P.SET
6]
for at least 2 seconds.
The
selected channel is stored.
3 Repeat the procedure to store up to 5 other channels
onto the same band.
To
use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of
18
channels can be stored
in
the preset memory
(6 channels for each band;
XM1,
XM2
and
XM3
or
SIRIUS-1, SIRIUS-2 and SIRIUS-3
).
•
If
you store a channel
in
a preset already being used. the current
channel will be replaced with the new one.
Receiving
Stored
Channels
1 Touch
(P1/3]
after selecting a desired band.
The Function Guide is switched.
2 Touch
anyone
of the preset buttons
(P.SET
1]
through
(P.SET
6]
that has your desired satellite
channel
in
memory.
62-EN
Search
Function
(XM
mode)
1 In XM mode, touch
(0].
The
category search list is displayed.
Screen
example
for
category
search
list
CD
The list scrolls one line at a time
by
touching
[.&.l
or
["'l.
eg)
Touch
[~
1to receive the selected category channel
directly.
@
I»~
1is
displayed
if there is a hierarchical list.
Touch
I»~
1to change the channel name search screen of
the selected category.
@
Category
UP/DOWN can directly
be
performed.
@ Scroll the list one
page
at a time
by
touching
Ii]
or
I'].
Screen
example
for
channel
name search list
CD
The list scrolls one line at a time by touching
['&']
or
["'l·
eg)
The selected channel is received.
@ Returns to the
category
search list.
@
Changes
the
category
@ Scroll the list one
page
at a time
by
touching
Ii]
or
['J.
2 Touch
(~
]
of
the selected Category or Channel
name.
The channel
in
the selected category
is
tuned.
Checking
the
SAT
Radio
ID
Number
A unique Radio [D number is required to subscribe to SAT Radio
programming. Each third party
XM
or SIRIUS radio comes with this
number.
XMRadlo:
This number is an 8 character alphanumeric number. It is printed on a
[abel found on the SAT Receiver.
SIRIUS
Radio:
This number
is
a
12
digits number. It is printed on a label found on the
SAT Receiver.
It can also be displayed on the screen
of
the IVA-W505 in the following
way.
1 While receiving SAT Radio, touch NO. (
..
]
or
(~
] to
select channel '0' for
XM
and channel "255" for
SIRIUS.
The
unit displays the
ID
number.
2
To
cancel the
10
number display, change the
channel.
•
You
cannot use
"0",
"S
..
,
..
["
or
"F"for
the ID Number. (XM radio
Receiver only)
•
You
can check the ID numberprinted on a label on your third party,
SAT
Radio Receiver package.
Storing
Channel
Presets
1 Touch
(P1/3]
after selecting a desired band.
The Function Guide is switched.
2 Touch and hold
anyone
of the preset buttons
(P.SET
1]
through
(P.SET
6]
for at least 2 seconds.
The
selected channel is stored.
3 Repeat the procedure to store up to 5 other channels
onto the same band.
To
use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of
18
channels can be stored
in
the preset memory
(6 channels for each band;
XM1,
XM2
and
XM3
or
SIRIUS-1, SIRIUS-2 and SIRIUS-3
).
•
If
you store a channel
in
a preset already being used. the current
channel will be replaced with the new one.
Receiving
Stored
Channels
1 Touch
(P1/3]
after selecting a desired band.
The Function Guide is switched.
2 Touch
anyone
of the preset buttons
(P.SET
1]
through
(P.SET
6]
that has your desired satellite
channel
in
memory.
62-EN
Search
Function
(XM
mode)
1 In XM mode, touch
(0].
The
category search list is displayed.
Screen
example
for
category
search
list
CD
The list scrolls one line at a time
by
touching
[.&.l
or
["'l.
eg)
Touch
[~
1to receive the selected category channel
directly.
@
I»~
1is
displayed
if there is a hierarchical list.
Touch
I»~
1to change the channel name search screen of
the selected category.
@
Category
UP/DOWN can directly
be
performed.
@ Scroll the list one
page
at a time
by
touching
Ii]
or
I'].
Screen
example
for
channel
name search list
CD
The list scrolls one line at a time by touching
['&']
or
["'l·
eg)
The selected channel is received.
@ Returns to the
category
search list.
@
Changes
the
category
@ Scroll the list one
page
at a time
by
touching
Ii]
or
['J.
2 Touch
(~
]
of
the selected Category or Channel
name.
The channel
in
the selected category
is
tuned.
To Next Page
Loading...
