USB
Memory
(Optional)
A USB memory or Portable audio player can be connected to the IVA-
W505 through the USB Connector
of
this unit.
If a USB memory device or Portable audio player
is
connected to the
unit,
MP3fWMA/AAC
files
of
USB memory and MP3fWMA files
of
Portable audio player can be played back.
BANK
Function
(USB
memory
only)
What is a Bank?
A bank is a unit
of
up to 1,000 songs, which is stored
in
memory.
"Banking" refers to the action of building up a bank (of songs)
from the songs available in
USB
memory.
About Banking
While a bank is being built up, "BANKING" is displayed. If
another bank is selected when unit power
is
turned on, the ACC
position is set. or
USB
connection is made, banking will start.
It can take anywhere from a few seconds to up to
10
minutes for
banking to complete. This depends on the number of files and
folders
in
USB
memory.
Available operations while Banking
• Search functions, such as album search or tag information
(artist display, etc.) are available during the banking process.
However, during such time, tag information display changes.
• Regular fast-forwarding and next song selection is available.
• During Banking, the played back song order may differ from
the song order
in
USB memory.
This unit has the BANK function that automatically divides every 1,000
songs stored in USB memory into individual banks to make searching
and playing back a song easier. A maximum
of
1,000 songs for one
bank can be stored according to the order stored in USB memory. A
maximum
of
10
banks (10,000 songs) can be recognized. BANKI
(songs 1 to 1,000)
is
set as the default.
If
you want to search beyond
1,000 songs, perform the following operation to select a different bank.
BANK
No.
Song number
BANK1
1-1.000
BANK2 1.001-2.000
,
BANK10 9,001-10,000
Playback
1 Touch
[SOURCE]
on the main source screen.
The SOURCE selection screen is displayed.
2 Touch
[USB
AUDIO],
the USB mode is activated
and the display changes to the USB screen.
3 Touch
[!-+II]
or
[~]
to select the desired track
(file).
Returning to the beginning
of
the current track (file):
Touch
[!-+III.
Fast backward (Only for USB memory):
Touch
and
hold
[!-+II].
Advancing
to
the beginning
of
the next track (file):
Touch[~].
Fast forward (Only for USB memory):
Touch
and
hold
[~I
4
To
pause playback, touch
[~/II].
Touching
[~/III
again will resume playback.
•
WMAformat
files that are protected by DRM (Digital Rights
Management).
AAC
fonnat
files that have been purchasedfrom
iTunes Music Store andfiles that are copy-protected (copyright
protection) cannot be played back on this unit.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recordedfile is played back.
•
If
there is tag infonnation, artist name/album name/track name is
displayed.
•
1D3
taglWMA tag
If
an MP3IWMAlAACfile contains
1D3
taglWMA tag information,
the ID3 taglWMA tag information is displayed (e.g
..
song name,
artist name,
and
album name).
All
other tag data is ignored.
• "NO SUPPORT" is scroll displayed when text infonnation is not
compatible with this unit.
• Before disconnecting USB memory, be sure to change to another
source
or
set to pause.
Repeat
Play
Only Repeat One
is
available for this mode.
Repeat One: A single song is repeatedly played back.
1 Touch
[P1/2].
The function guide
is
displayed.
RPT
f4
(Repeat One)
Touch [r::::J].
The file will be played repeatedly,
2
(off)
(Repeat the list being
played back)
3
To
cancel repeat play, touch [
r::::J
].
• Even
if
the files are contained in the same folder, they may be saved
as different BANK.
1 Touch
[P1/2]
to change the function guide.
2 Touch
BANK
[
..
] or [ ... ] to select the desired
BANK.
Each operation can be performed in the selected bank.
65-EN
USB
Memory
(Optional)
A USB memory or Portable audio player can be connected to the IVA-
W505 through the USB Connector
of
this unit.
If a USB memory device or Portable audio player
is
connected to the
unit,
MP3fWMA/AAC
files
of
USB memory and MP3fWMA files
of
Portable audio player can be played back.
BANK
Function
(USB
memory
only)
What is a Bank?
A bank is a unit
of
up to 1,000 songs, which is stored
in
memory.
"Banking" refers to the action of building up a bank (of songs)
from the songs available in
USB
memory.
About Banking
While a bank is being built up, "BANKING" is displayed. If
another bank is selected when unit power
is
turned on, the ACC
position is set. or
USB
connection is made, banking will start.
It can take anywhere from a few seconds to up to
10
minutes for
banking to complete. This depends on the number of files and
folders
in
USB
memory.
Available operations while Banking
• Search functions, such as album search or tag information
(artist display, etc.) are available during the banking process.
However, during such time, tag information display changes.
• Regular fast-forwarding and next song selection is available.
• During Banking, the played back song order may differ from
the song order
in
USB memory.
This unit has the BANK function that automatically divides every 1,000
songs stored in USB memory into individual banks to make searching
and playing back a song easier. A maximum
of
1,000 songs for one
bank can be stored according to the order stored in USB memory. A
maximum
of
10
banks (10,000 songs) can be recognized. BANKI
(songs 1 to 1,000)
is
set as the default.
If
you want to search beyond
1,000 songs, perform the following operation to select a different bank.
BANK
No.
Song number
BANK1
1-1.000
BANK2 1.001-2.000
,
BANK10 9,001-10,000
Playback
1 Touch
[SOURCE]
on the main source screen.
The SOURCE selection screen is displayed.
2 Touch
[USB
AUDIO],
the USB mode is activated
and the display changes to the USB screen.
3 Touch
[!-+II]
or
[~]
to select the desired track
(file).
Returning to the beginning
of
the current track (file):
Touch
[!-+III.
Fast backward (Only for USB memory):
Touch
and
hold
[!-+II].
Advancing
to
the beginning
of
the next track (file):
Touch[~].
Fast forward (Only for USB memory):
Touch
and
hold
[~I
4
To
pause playback, touch
[~/II].
Touching
[~/III
again will resume playback.
•
WMAformat
files that are protected by DRM (Digital Rights
Management).
AAC
fonnat
files that have been purchasedfrom
iTunes Music Store andfiles that are copy-protected (copyright
protection) cannot be played back on this unit.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recordedfile is played back.
•
If
there is tag infonnation, artist name/album name/track name is
displayed.
•
1D3
taglWMA tag
If
an MP3IWMAlAACfile contains
1D3
taglWMA tag information,
the ID3 taglWMA tag information is displayed (e.g
..
song name,
artist name,
and
album name).
All
other tag data is ignored.
• "NO SUPPORT" is scroll displayed when text infonnation is not
compatible with this unit.
• Before disconnecting USB memory, be sure to change to another
source
or
set to pause.
Repeat
Play
Only Repeat One
is
available for this mode.
Repeat One: A single song is repeatedly played back.
1 Touch
[P1/2].
The function guide
is
displayed.
RPT
f4
(Repeat One)
Touch [r::::J].
The file will be played repeatedly,
2
(off)
(Repeat the list being
played back)
3
To
cancel repeat play, touch [
r::::J
].
• Even
if
the files are contained in the same folder, they may be saved
as different BANK.
1 Touch
[P1/2]
to change the function guide.
2 Touch
BANK
[
..
] or [ ... ] to select the desired
BANK.
Each operation can be performed in the selected bank.
65-EN
To Next Page
Loading...
