Alpine IVA-W505 - Page 94

When Connecting External Equipment
To Audio Input terminal
® --~ Rear monitor
--~ (Sold Separately)
--~
To Video Input terminal
To Video Output terminal
Back-Up camera
(Sold Separately)
To S Video Output terminal
Device with S Video terminal
(Sold separately)
(,------------oGl,. II
®
o 8
NORM EQ/DIV
TV Tuner or VCR
(Sold Separately)
To Video Output terminal
--~
:=~
To Audio Output terminal
~----------------------------l
I (White/Plnk) M.CONT ® M.CONT (White/Plnk) I
I * Connect this to the touch panel·compatible rear monitor. I
-----------------------------
(Whltll/Brown)
REMOTEOUT@
REMOTE IN
(WhiteIBrown)
(Whltll/Brown)
REMOTE IN (J)
REMOTE OUT
(WhltelBrown)
(OrangelWhite) REVERSE
@
-------------------t:ffiJi~ __ Use only when back-up camera is connected.
CD System Switch
When connecting an equalizer or divider using Ai-NET
feature, place the two switches
in the EQ/DIV position.
When no device
is connected, leave the switches in the
NORM position.
• Do not make the two switches to different settings.
• Be sure to
tum the power off to the unit before changing the switch
position.
@ CAMERA Input Connector
Use when connecting a back-up camera.
@ Video/Audio Output Connectors (AUX OUTPUT)
Use when connecting an optional monitor etc.
@ Video/Audio Input Connectors (AUX INPUT)
@ Monitor Control Lead (WhitelPink)
Connect this to the Monitor Control Lead of the touch panel-
compatible rear monitor.
® Remote Control Output Lead (WhiteIBrown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
(j) Remote Control Input Lead (White/Brown)
® Reverse Lead (OrangelWhite)
Use only when a back-up camera is connected. Connect to
the plus side of the car's reverse lamp. This lamp illuminates
when the transmission
is shifted into reverse (R).
With this lead properly wired, the video picture
automatically switches to the back-up camera whenever the
car is put into reverse (R).
® RCA Extension Cable (Sold Separately)
@ AUX I/O Camera In Connector
@ S Video Input Connector
Input the video signal.
Connect
to the output terminal of S video of connected
devices.
92-EN
When Connecting External Equipment
To Audio Input terminal
® --~ Rear monitor
--~ (Sold Separately)
--~
To Video Input terminal
To Video Output terminal
Back-Up camera
(Sold Separately)
To S Video Output terminal
Device with S Video terminal
(Sold separately)
(,------------oGl,. II
®
o 8
NORM EQ/DIV
TV Tuner or VCR
(Sold Separately)
To Video Output terminal
--~
:=~
To Audio Output terminal
~----------------------------l
I (White/Plnk) M.CONT ® M.CONT (White/Plnk) I
I * Connect this to the touch panel·compatible rear monitor. I
-----------------------------
(Whltll/Brown)
REMOTEOUT@
REMOTE IN
(WhiteIBrown)
(Whltll/Brown)
REMOTE IN (J)
REMOTE OUT
(WhltelBrown)
(OrangelWhite) REVERSE
@
-------------------t:ffiJi~ __ Use only when back-up camera is connected.
CD System Switch
When connecting an equalizer or divider using Ai-NET
feature, place the two switches
in the EQ/DIV position.
When no device
is connected, leave the switches in the
NORM position.
• Do not make the two switches to different settings.
• Be sure to
tum the power off to the unit before changing the switch
position.
@ CAMERA Input Connector
Use when connecting a back-up camera.
@ Video/Audio Output Connectors (AUX OUTPUT)
Use when connecting an optional monitor etc.
@ Video/Audio Input Connectors (AUX INPUT)
@ Monitor Control Lead (WhitelPink)
Connect this to the Monitor Control Lead of the touch panel-
compatible rear monitor.
® Remote Control Output Lead (WhiteIBrown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
(j) Remote Control Input Lead (White/Brown)
® Reverse Lead (OrangelWhite)
Use only when a back-up camera is connected. Connect to
the plus side of the car's reverse lamp. This lamp illuminates
when the transmission
is shifted into reverse (R).
With this lead properly wired, the video picture
automatically switches to the back-up camera whenever the
car is put into reverse (R).
® RCA Extension Cable (Sold Separately)
@ AUX I/O Camera In Connector
@ S Video Input Connector
Input the video signal.
Connect
to the output terminal of S video of connected
devices.
92-EN