24-EN
2 Touch [KEY].
The menu operation mode will be displayed.
3 Select a desired menu item by touching [ ], [ ], [ ] or [ ].
4 Touch [ENTER] to confirm the selected item.
Numeric Keypad Input Operations
1 Touch [CONTROL] to display the operation keys.
2 Touch [KEY].
The menu operation mode appears.
3 Touch [KEY] again.
The numeric keypad input mode screen appears.
4 Touch a desired number.
5 Touch [ENT] on the numeric keypad mode screen to confirm
your selection.
When a DVD contains two or more titles, the top menu screen appears.
Touch [TOP MENU] on the DVD mode main screen.
The top menu screen appears.
• To perform necessary operations, see “If a menu screen appears” on
page 23.
1
Touch [P1/2] on the DVD mode main screen.
The function guide changes.
2
Touch [MENU CONT].
The menu operation mode screen appears.
• For further operation, see “If a menu screen appears” on page 23.
Stopping Playback (PRE STOP)
Press the stop button during playback to stop playback. That position is
stored in the memory.
1
Touch [ ] once during playback.
“PRE STOP” is displayed.
2
Touch [ / ] in the PRE STOP mode.
Playback starts from the position at which it was stopped.
• For some discs, the position at which playback was stopped may not
be accurate.
Touch [RETURN] to return to the previous
display.
Displaying the Top Menu Screen
Displaying the Menu Operation Mode
Screen
Touch [] to close the numeric
keypad input screen.
The numeric
keypad input
screen closes
when the area
is touched
while displayed.
To Next Page
Loading...
