Alpine IVA-W520R - Adjusting the Audio

28-EN
Adjusting the Audio
1 Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2 Touch [AUDIO SETUP].
The AUDIO SETUP screen appears.
Display Example for Audio Adjustment Screen
• Touching [ ] or [ ] will scroll the list one line at a time.
Touching [ ] or [ ] will scroll the list one page at a time.
• Touching [ESC] will change to the main source screen.
• The A.PROCESSOR menu items will differ depending on which
optional audio processor is connected. The IMPRINT audio
processor (PXA-H100) or External Audio processors may be used.
For details, refer to
“IMPRINT Operation (Optional)” (page 50) or
“External Audio Processor (Optional)” (page 43).
Adjusting Balance/Fader
Touch [ ] of BALANCE/FADER, the adjusting screen of
BALANCE/FADER will be displayed.
Display Example for BALANCE/FADER Screen
Adjusting the Fader
Touch [F] or [R] to adjust the volume of the front and
rear speakers.
Setting range: F15 to R15
• If an IMPRINT audio processor (PXA-H100) is connected to this unit
and you have set the 2.2ch (3WAY)/4.2ch (FRONT/REAR/SUBW.)
switch of the IMPRINT audio processor (PXA-H100) to 2.2ch
(3WAY), you cannot adjust the FADER mode. For details, refer to the
Owner’s Manual of PXA-H100.
Adjusting the Balance
Touch [L] or [R] to adjust the sound volume of the left
and right speakers.
Setting range: L15 to R15
Adjusting the Balance/Fader Directly
Touch and move [ ] to a desired setting.
Or touch a desired setting range, and [ ] will move to that
location.
Touch [L] or [R] of Balance and [F] or [R] of Fader for fine-tuning.
Adjusting Bass/Treble
You can change the bass/treble frequency emphasis to
create your own tonal preference.
Touch [ ] to display the Bass/Treble adjusting screen.
Touch [ ] or [ ] on the scroll bar to scroll the setup items line
by line.
• Adjustment cannot be performed when an external audio processor is
connected and DEFEAT is set to ON.
Setting the Bass level
You can emphasize or weaken the bass frequency.
Touch [ ] or [ ] of BASS LEVEL to select the desired bass
level.
Setting range: –7 to +7
Setting the Bass Centre Frequency
The displayed bass frequency is emphasized.
Touch [ ] or [ ] of BASS FREQ. to select the desired bass
centre frequency.
Setting range: 60 Hz, 80 Hz, 100 Hz, 200 Hz
Other Useful
Features
A
B
C