4
Verify update process
X To verfiy the update process please select Main Menu - Settings - About
X Compare version number and release date.
X The file “Update.log.txt stored on the USB stick during the update process
shows details about the update process (success / failure).
Initialisation of RUE-M300
X Connect the USB IR Receiver RUE-M300 to the NVE-M300P via the USB cable delivered
with NVE-M300P. Standard USB extension cables can be used if length is not sufficient.
X To activate RUE-M300, press any button at the remote controller except the TMC button.
After this initialisation the RUE-M300 Remote Controller is ready for use.
To Previous Page
Loading...
