Power Output (1) 20Hz, 4ohm, 1.0% T.H.D. (14.4V) 1000W
100Hz, 4ohm, 1.0% T.H.D. (14.4V) 1000W
(2) 20Hz, 2ohm, 1.0% T.H.D. (14.4V) 1000W
100Hz, 2ohm, 1.0% T.H.D. (14.4V) 1000W
T.H.D. (100Hz, 400W/ 4ohm (14.4V)) 1.0%
Residual Noise (Input Short) 20mV
S/N Ratio (Ref.Output 1000W/ 4ohm, Input Short) 80dB
Frequency Response (Ref.Output 1W/ 4ohm, Ref.Frequency 100Hz) 20Hz : -0.5±2dB
200Hz : -3.5±2dB
Output Offset Voltage (No Signal) ±150mV
Remote On Voltage (1W Output) 6.4±1V
Current Drain (1) No Signal 3.0A
(2) 10% T.H.D., 2ohm Load 150A
(3) Remote Current Drain 0.27±0.2mA
(4) Back Up Current Drain 1.2mA
Input Sensitivity (Ref.Output 1000W/ 4ohm, 100Hz) (Input sensitive volume position : MAX)
Input level switch position : 0.1Vrms~1.0Vrms 125mV±3dB
Input level switch position : 1.0Vrms~8.0Vrms 1000mV±3dB
SUB-SONIC Filter (Input 100Hz, Ref.Output 1W/ 4ohm)
SUB-SONIC Filter switch position : 15Hz -4.0dB±2dB
SUB-SONIC Filter switch position : 30Hz -3.4dB±2dB
Pre-Out Level at 1.0V Input 1.0V±3dB
Input Impedance (Reference) 29.2kohm±10%
Fuse Requirement 20A(Peak) x 4 (For Battery Line)
Power Source DC14.4V (11 to 16V)
Dimensions (W x H x D) 257 x 62 x 192mm
Weight 3.41kg
NOTE : Due to Continuing product improvement, specifications and designs are subject to change without notice.
To Next Page
Loading...
