EasyManua.ls Logo

Alpine SBT-S10V - Pre-Installation Speaker Guidelines; Avoid Amplifier Overdrive; Proper Gain Control Setting; Speaker Rating Compatibility

Alpine SBT-S10V
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IMPORTANT NOTICE!
PLEASE
READ
FIRST
BEFORE
INSTALLING SPEAKERS
Congratulations on your purchase of high
quality
speakers
from
Alpine.
Your listening
satisfaction is important to us.
In
order to
maximize and maintain peak speaker performance the
following
guidelines are being provided. Please
read this notice
carefully
before operating the speakers.
1.
Do
not
over-drive the amplifier.
Over-driving the
ampiHier will
result in distortion
or
clipping
and can damage any speaker.
2.
Make sure gain
controls
are properly set.
(Follow
instructions in amplifier
owner's manual.)
3.
Make sure that the speaker is
properly rated
for
the amplifier.
4.
Make sure that
volume,
bass,
treble, equalization
or
crossover settings
do
not cause the amplifier
to
over-drive.
Failure
to follow these
guidelines may result
in
burned or damaged
speaker voice coils
which will void your warranty .
.If
further assistance is necessary, please
contact
your
Alpine
authorized dealer.
68-00493Z64-A
(Y)