BATTERY INSTALLATION (Fig. 2)
1. Place
two
alkaline AAA batteries into the
battery compartment
of
the Headphones(s), making sure
that the battery polarity is correct.
Fig. 2
~
NOTE:
This single source headphone, SHS-N1 06, is not compatible
with the dual source system, SHS-N252.
FOLD-FLAT
FUNCTION
(Fig.
3)
1.
Fold the earpieces flat for easy storing.
2.
Turn the earpieces
90°
back
to
wear on head.
Fig. 3
Open
Position
CONTENTS
1 - Single Source Fold-Flat Headphone (SHS-N1
06)
2 - AAA Batteries
1 - Ownerls Manual
OPERATION
Please
Read
Carefully to Prevent
Damage
to the Headphones or your
Ears:
WARNING: Before turning on the power, remove headphones and turn
the volume down
as
low as possible.
1)
Be sure batteries are properly installed
in
the headphones
2)
Turn the headphone volume completely down before placing it
on
your ears and turning on the power.
Turn on the headphone power and adjust the headphone volume to
a comfortable level (You can increase the audio source volume if
needed).
To Next Page
Loading...
